Husqvarna manual Technical Data, Specifications DT22

Page 39

TECHNICAL DATA

Specifications	DT22
Engine	Honda GX160
Cylinder volume	163 cm3 (9.9 cu in)
Power	5.5 hp (4 kW) at 3600 RPM
Torque	10.8 Nm at 2500 RPM
Spark plug	NGK BPR6ES
	DENSO W20EPR-U
Fuel volume	3.6 liters/0.95 US Gal
Primary drive	One V-belt
Dethatching breadth	55.8 cm (22")
Clutch control	Handle-mounted with
	automatic safety declutching
Clutch	Belt tightener with spring return and idling pulley
mechanism
Seeding breadth	55.8 cm (22")
Depth setting	Adjustable depth control with lever mechanism with lock and stop
Flail blade reel	52 case-hardened steel blades with 1.6 cm (5/8") spacers
	0.3 x 2.5 x 8.9 cm (1/8" x 1" x 3 1/2")
Delta blade reel	20 austempered 12-gauge steel blades
	with 5 cm (2") spacers
Spring tine reel	Not applicable
Handle	Fixed, ergonomic design with upholstery
Catcher bag	0.23 m3 (8 ft3) synthetic material on frame with wheels
Seed hopper	22.3 l (1.358 inch3) or approx. 13.6 kg
	(30 lbs) seed. Self-propelled stirring. Inspection window.
Weight	Dethatcher 65.3 kg (144 lbs)
	with seed hopper 74.8 kg (165 lbs)
	with catcher bag 71.2 kg (157 lbs)
Width	71 cm (28")
Length	68 cm (26 3/4") without handle
	127 cm (50") with handle
Height	61 cm (24") without handle
	102 cm (40") with handle
Distance between axles	45 cm (17 3/4") center to center
Bearings	3/4" closed flanged cartridge
Wheels	Front 8" x 1 3/4"
	Back 10" x 2 3/4" catcher bag
	Back 10" x 1 3/4" seed hopper

39

Image 39

Contents DT22 Table of Contents Introduction Decals and machine-bound instructions Symbols and DecalsLocation of decals Translation of instructions Decal Seed application chartGeneral use Safety InstructionsSafety Instructions Preparations Running Movement/Transport StorageChildren Fuel system Maintenance Presentation PresentationMain components and operating instruments Throttle control EngineChoke StarterStarter handle Fuel valveOil drainage Spark plugMuffler Oil dipstickFueling Fuel tankClutch Cutting unit Depth leverDepth knob Depth lockDelta blade Setting blade heightBlade versatility Flail bladeStarting the engine OperationCutting the engine Before you start StartingFinishing Maintenance schedule MaintenanceReplacing the air filter Idle adjustment Cleaning the sludge reservoirFitting the wrong spark plug type can damage the engine Ignition systemCutting unit Checking the drive beltReplacing the drive belt Wear/Rotation/Replacing flail blades Replacing worn flail blades When tipping the machine forward observe the Two minute ruleSpring Tine Screw Wear/Replacing delta bladesScrews Delta Blade Nuts Wear/Replacing spring tinesTwo minute rule Cleaning and washingLubrication Lubrication scheduleGeneral Checking the engine’s oil level Engine oilHandle Depth knob with depth lockBlades Depth leverSymptom Cause Engine will not start TroubleshootingService StorageWinter storage Specifications DT22 Technical DataAssembly delivery service Assembly InstructionsAssembly directions, catcher bag Bagger AssemblyAttach the chute to the mainframe Extender Wire tie the cable to the handle. See Correct height setting Instructions for the catcher bagCollection conditions Do not use or start the engine until the seeder is in place Seeder AssemblyRe-attach rubber flap rod with push nut to Seed Gate Cable Clamp Instructions for the seeder Adjusting the seed hopperService Journal Delivery serviceAfter the first 20 hours Vibraton Level Sound TestPage Page ´z+H3J¶6T¨ Page 2003W10 114 01