Husqvarna 15Ts AWD manual Safety Instructions, Safety instructions, Insure your Rider, General use

Page 8

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

•Check the insurance coverage for your new Rider.

•Contact your insurance company.

•You should have fully comprehensive insurance including: third party, fire, damage, theft and liability

General use

•Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

WARNING! This machine produces an

!electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

•Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

•Only allow the machine to be used by adults who are familiar with its use.

•Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

•Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

8 – English

•Stop the engine and prevent the engine from being started until you have cleaned the outlet channel.

•Look out for the ejector and do not direct it towards anyone.

•Stop the engine and prevent it from starting before you clean the cutting unit.

•Remember that the driver is responsible for dangers or accidents.

•Never carry passengers. The machine is only intended to be used by one person.

•Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

•Slow before cornering.

•Switch off the blades when you are not mowing.

•Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

!

WARNING! This machine can sever hands

and feet as well as throw objects. Failure to

observe the safety instructions can result in

 

serious injuries.

!

WARNING! The inside of the muffler contain

chemicals that may be carcinogenic. Avoid

contact with these elements in the event of a

 

damaged muffler.

!

WARNING! The engine emits carbon

monoxide, which is a colourless, poisonous

gas. Do not use the machine in enclosed

 

spaces.

•Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgement or co- ordination.

•Keep an eye on the traffic when working close to a road or when crossing it.

•Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Rider 15T Rider 15T AWD Rider 15Ts AWD EnglishContents After the first 8 hours Service journalPre-delivery service Introduction KEY to Symbols SymbolsKEY to Symbols What is WHAT? What is what on the ride-on mowerSafety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport Presentation Cutting height adjustment lever Cutting unitLifting lever for the cutting unit LightsExercise care and refuel outdoors see safety instructions FuellingRelease lever Clutch control Rider 15T AWD and Rider 15Ts AWDStart the engine DrivingBefore starting Starting the engine with a weak battery Connecting the jump leadsDriving the Rider Remove the cables in the reverse orderCutting tips Stop the engineMaintenance Maintenance scheduleRemoving of the machine hoods CleaningChecking and adjusting the steering wires Can result in reduced braking ability Adjusting the parking brake Rider 15TChecking and adjusting of throttle wire Checking and adjusting the choke wire Replacement of fuel filterReplacing the air filter Cool before starting to replace the air filterReplacing the spark plug Checking the fuel pump’s air filterIgnition system Check the safety system Replacing the light bulbs Main fuseChecking the tyre pressure Checking the engine’s cooling air intakeWhen the engine is running. Mind your fingers Fitting the cutting headTrapping your hand Lift up the cutting unitRemoving the cutting unit Adjusting the parallelism of the cutting unit Hands when working with the bladesChecking the cutting unit’s parallelism Replacing the cutting unit beltsService position for the cutting unit Placing in the service positionRestoring from service position Checking the bladesRemoving the BioClip plug CombiClip 103, CombiClipLubrication Checking the engine’s oil levelChanging the oil filter Replacing the engine oilGeneral lubrication Lubricating the belt adjusterChecking the transmission oil level Troubleshooting schedule Problem ProcedureService StorageWinter storage GuardTechnical data Cutting unit CombiClip EN ISO 12100-2, EN-836 EC-declaration of conformity Applies to Europe onlyEC-declaration of conformity Page ´z+U+r¶6§¨ Page 1153118-26 ´z+U+r¶6§¨ ´z+U+r¶6§¨
Top Page Image Contents