Ryobi RY09050 manuel dutilisation Operation

Page 10

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

APPLICATIONS

You may use this product for the purposes listed below:

Clearing leaves and other debris from your lawn

Keeping decks and driveways free from leaves and pine needles

Vacuuming leaves from your lawn

MIXING THE FUEL

This product is powered by a 2-cycle engine and requires premixing gasoline and 2-cycle oil. The mixture should be at a 50:1 ratio.

NOTE:  We recommend you use ONLY Ryobi (exact mix) your product.

To mix the fuel:

Use a clean container that is approved for use with gaso- line.

Mix the 2-cycle engine oil with unleaded gasoline in the container, according to the instructions on the oil pack- age.

This engine is certified to operate on unleaded gasoline intended for automotive use with an octane rating of 87 [(R + M) / 2] or higher. Do not use automotive oil or 2-cycle outboard oil.

NOTE:  Most fuel mixture will stay fresh up to 30 days. DO NOT mix quantities larger than usable in a 30 day period.

2-CYCLE FUEL / OIL MIX (50:1)

GASOLINE

OIL

1 gallon (US)

2.6 oz.

1 liter

20 cc (20 ml)

FILLING THE TANK

Clean the surface around the fuel cap to prevent con- tamination.

Loosen the fuel cap slowly by turning counterclock- wise.

Pour the fuel mixture carefully into the tank.

Clean and inspect the fuel cap gasket before replacing the fuel cap.

Replace the fuel cap and tighten it by turning it clock- wise.

Wipe spilled fuel from the product.

Move at least 30 ft. away from refueling area before start- ing the product.

NOTE:  It is normal for smoke to be emitted from a new engine during first use.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke and stay away from open flames and sparks. Failure to safely handle fuel could result in serious per- sonal injury.

OXYGENATED FUELS

DO NOT USE E85 FUEL. IT WILL VOID YOUR WARRANTY.

NOTE:  Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more than the percentages of oxygenates stated previously are not covered under warranty.

Ethanol. Gasoline containing up to 10% ethanol by volume (commonly referred to as E10) or 15% ethanol by volume (commonly referred to as E15) are acceptable.

Do not use E85 fuel.

STARTING AND STOPPING

See Figure 8.

To start a cold engine:

DO NOT squeeze the throttle trigger until the engine starts and runs.

Lay the blower/vacuum on a flat, bare surface.

PRIME - Press the primer bulb 7 times.

SET the start lever to the START position.

PULL the starter grip with rope until the engine starts.

NOTE: Squeezing and releasing the throttle trigger releases the start lever to the RUN position.

8 - English

Image 10
Contents Save this Manual for Future Reference ALL Versions Toutes LES Versions Todas LAS VersionesAseguramiento Screw vis, tornillo Manos alejadas de las silenciador Table of Contents Table DES Matières / Índice DE Contenido General Safety Rules Read all instructionsSpecific Safety Rules FuelingSymbols Symbol Signal MeaningFeatures AssemblyTo install the vacuum tubes Installing the vacuum bagInstalling the vacuum tubes Assembling the Blower TubesOperation To start a warm engine Operating the BlowerVacuum Operation To stop the engineCleaning the AIR Filter MaintenanceGeneral Maintenance Cleaning the Exhaust PORT, Muffler and spark arrestorWhen storing 1 month or longer TroubleshootingSpark Plug replacement Problem Cause RemedyWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage This product was manufactured with a catalyst muffler Règles de sécurité générales Conserver ces instructionsRègles de sécurité particulières Approvisionnement en carburantSymbole Nom SymbolesExplication Caractéristiques AssemblageInstallation des tubes d’aspiration Installation DU SAC À DébrisInstallation des tubes d’aspiration Assemblage DES Tubes DE SoufflanteRemplissage du réservoir UtilisationMélange DU Carburant Carburants OxygénésUtilisation de l’aspirateur Utilisation DE LA SoufflanteRégulateur DE Vitesse AVERTISSEMENT  AvertissementNettoyage LE Filtre À AIR EntretienVoir la et SAC À Débris REMPLACement de la BougieDépannage Bouchon DU Réservoir AvertissementGarantie Énoncé DE LA Garantie LimitéeResponsabilités DU Propriétaire Dans LE Cadre DE LA Garantie Besoin 4050Reglas de seguridad generales Guarde estas instruccionesReglas de seguridad específicas Abastecimiento de combustibleAdvertencia SímbolosPeligro PrecauciónCaracterísticas ArmadoS ta l a c i ó n d e l s a code l a aspiradora Lista de empaquetadoMontaje DE LOS Tubos DE LA Sopladora Instalación de los tubos de la aspiradoraFuncionamiento Control DE Crucero Manejo DE LA SopladoraManejo DE LA Aspiradora Limpieza LA filtro de aire MantenimientoMantenimiento General Vea la figura 13 yTapa DEL Tanque DE Combustible Advertencia Solución de problemasSaco DE LA Aspiradora Reemplazo de la BujíaGarantía Declaración DE LA Garantía LimitadaCobertura DE LA Garantía DEL Fabricante Este producto se fabricó con un silenciador catalítico Conjunto DE Silenciador CatalíticoPage Manuel D’UTILISATION Manual DEL Operador RY09050

RY09050 specifications

The Ryobi RY09050 is a versatile and efficient outdoor power tool designed for homeowners and landscapers alike. This lightweight and powerful gas-powered string trimmer features a 30cc, 2-cycle engine that offers robust performance for tackling thick grass and tough weeds. Its ergonomic design ensures comfortable handling during extended use, making it a popular choice for those who require a reliable solution for their yard maintenance.

One of the standout features of the RY09050 is its Easy Start technology, which significantly reduces the effort required to start the engine. This innovation allows users to pull the starter cord with less force, making it particularly convenient for those who may find traditional starting methods cumbersome. The inclusion of a straight shaft design enhances reach and maneuverability, enabling users to access hard-to-reach areas such as underneath shrubs and around fences.

The trimmer boasts a 17-inch cutting width, allowing users to cover a wide area with each pass, ultimately saving time on larger properties or extensive landscaping projects. Additionally, the RY09050 is equipped with a dual-line bump feed head that enables quick and easy line advancements, allowing users to maintain productivity without frequent interruptions.

Another significant characteristic of the Ryobi RY09050 is its lightweight construction. Weighing only about 10 pounds, it is easy to handle and transport, while still delivering the power and durability expected from a Ryobi product. Furthermore, the unit is designed with an adjustable handle, allowing users to customize their grip for optimal comfort and control.

Ryobi is known for integrating user-friendly technologies in its products, and the RY09050 is no exception. It features a translucent fuel tank, which allows users to easily monitor fuel levels at a glance, reducing the risk of running out of gas unexpectedly. The trimmer also has a handy storage hook, making it convenient to hang and store when not in use, saving space in the garage or shed.

Overall, the Ryobi RY09050 combines power, efficiency, and convenience, making it an excellent choice for tackling outdoor trimming tasks. With its impressive features and user-friendly design, it stands out in the competitive market of string trimmers, catering to both novice homeowners and experienced landscapers.