Ryobi RY09050 manuel dutilisation General Maintenance, Cleaning the AIR Filter, See

Page 12

OPERATION

To avoid serious injury to the operator or damage to the unit, do not pick up rocks, metal, broken glass, bottles, or other similar objects.

If the vacuum tubes should clog, stop the engine , ensure impeller blades have stopped spinning, and disconnect the spark plug wire before cleaning out the obstruction.

Remove the vacuum tubes and clear the debris from the blower fan housing. Remove the bag and clear the tube. A small rod or stick may be required to clear the entire tube length. Ensure that all debris has been cleared before reassembling the vacuum tubes.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

Before inspecting, cleaning, or servicing the machine, shut off engine, wait for all moving parts to stop, and disconnect spark plug wire and move it away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, lubricant, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating lubricants, etc., come in con- tact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

You can often make adjustments and repairs described here. For other repairs, have the blower/vacuum serviced by an authorized service dealer.

CLEANING THE AIR FILTER

See Figure 13 - 14.

For proper performance and long life, keep air filter clean.

Remove the air filter cover by turning the dial counter- clockwise while gently pulling on the cover.

Rinse filter with clean water.

Gently squeeze filter until excess water is removed. Replace filter.

Place the air filter cover back on the unit. Turn dial clock- wise until cover is secure.

CLEANING THE EXHAUST PORT, MUFFLER and spark arrestor

NOTE:  Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port, muffler, and/or spark arrestor screen may be- come blocked with carbon deposits. If you notice a power loss with your gas powered tool, you may need to remove these deposits to restore performance. We highly recom- mend that only qualified service technicians perform this service.

The spark arrestor must be cleaned or replaced every 50 hours or yearly to ensure proper performance of your prod- uct. Spark arrestors may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrestor for your model.

WARNING:

Never run the blower without the spark arrestor in place. Failure to do so could result in a fire that could cause serious personal injury.

10 - English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Save this Manual for Future Reference ALL Versions Toutes LES Versions Todas LAS VersionesAseguramiento Screw vis, tornillo Manos alejadas de las silenciador Table of Contents Table DES Matières / Índice DE Contenido General Safety Rules Read all instructionsSpecific Safety Rules FuelingSymbols Symbol Signal MeaningFeatures AssemblyInstalling the vacuum bag Installing the vacuum tubesTo install the vacuum tubes Assembling the Blower TubesOperation Operating the Blower Vacuum OperationTo start a warm engine To stop the engineMaintenance General MaintenanceCleaning the AIR Filter Cleaning the Exhaust PORT, Muffler and spark arrestorTroubleshooting Spark Plug replacementWhen storing 1 month or longer Problem Cause RemedyWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage This product was manufactured with a catalyst muffler Règles de sécurité générales Conserver ces instructionsRègles de sécurité particulières Approvisionnement en carburantSymboles Symbole NomExplication Caractéristiques AssemblageInstallation DU SAC À Débris Installation des tubes d’aspirationInstallation des tubes d’aspiration Assemblage DES Tubes DE SoufflanteUtilisation Mélange DU CarburantRemplissage du réservoir Carburants OxygénésUtilisation DE LA Soufflante Régulateur DE VitesseUtilisation de l’aspirateur AVERTISSEMENT  AvertissementEntretien Nettoyage LE Filtre À AIRVoir la et REMPLACement de la Bougie DépannageSAC À Débris Bouchon DU Réservoir AvertissementGarantie Énoncé DE LA Garantie LimitéeResponsabilités DU Propriétaire Dans LE Cadre DE LA Garantie Besoin 4050Reglas de seguridad generales Guarde estas instruccionesReglas de seguridad específicas Abastecimiento de combustibleSímbolos PeligroAdvertencia PrecauciónCaracterísticas ArmadoLista de empaquetado Montaje DE LOS Tubos DE LA SopladoraS ta l a c i ó n d e l s a code l a aspiradora Instalación de los tubos de la aspiradoraFuncionamiento Manejo DE LA Sopladora Control DE CruceroManejo DE LA Aspiradora Mantenimiento Mantenimiento GeneralLimpieza LA filtro de aire Vea la figura 13 ySolución de problemas Saco DE LA AspiradoraTapa DEL Tanque DE Combustible Advertencia Reemplazo de la BujíaGarantía Declaración DE LA Garantía LimitadaCobertura DE LA Garantía DEL Fabricante Este producto se fabricó con un silenciador catalítico Conjunto DE Silenciador CatalíticoPage Manuel D’UTILISATION Manual DEL Operador RY09050

RY09050 specifications

The Ryobi RY09050 is a versatile and efficient outdoor power tool designed for homeowners and landscapers alike. This lightweight and powerful gas-powered string trimmer features a 30cc, 2-cycle engine that offers robust performance for tackling thick grass and tough weeds. Its ergonomic design ensures comfortable handling during extended use, making it a popular choice for those who require a reliable solution for their yard maintenance.

One of the standout features of the RY09050 is its Easy Start technology, which significantly reduces the effort required to start the engine. This innovation allows users to pull the starter cord with less force, making it particularly convenient for those who may find traditional starting methods cumbersome. The inclusion of a straight shaft design enhances reach and maneuverability, enabling users to access hard-to-reach areas such as underneath shrubs and around fences.

The trimmer boasts a 17-inch cutting width, allowing users to cover a wide area with each pass, ultimately saving time on larger properties or extensive landscaping projects. Additionally, the RY09050 is equipped with a dual-line bump feed head that enables quick and easy line advancements, allowing users to maintain productivity without frequent interruptions.

Another significant characteristic of the Ryobi RY09050 is its lightweight construction. Weighing only about 10 pounds, it is easy to handle and transport, while still delivering the power and durability expected from a Ryobi product. Furthermore, the unit is designed with an adjustable handle, allowing users to customize their grip for optimal comfort and control.

Ryobi is known for integrating user-friendly technologies in its products, and the RY09050 is no exception. It features a translucent fuel tank, which allows users to easily monitor fuel levels at a glance, reducing the risk of running out of gas unexpectedly. The trimmer also has a handy storage hook, making it convenient to hang and store when not in use, saving space in the garage or shed.

Overall, the Ryobi RY09050 combines power, efficiency, and convenience, making it an excellent choice for tackling outdoor trimming tasks. With its impressive features and user-friendly design, it stands out in the competitive market of string trimmers, catering to both novice homeowners and experienced landscapers.
Top Page Image Contents