RIDGID Metal Detector manual Information Screen and Restoring Defaults, Restore Factory Defaults

NaviTrack® II

Then use the Up and Down Keys to scroll through the available frequencies. Highlight the desired frequency to add it to the Activated Frequencies list (Figure 43).

Figure 43 – Highlighting a Frequency to Activate

Checking a frequency (using the Select Key) will include it in the selected frequencies on the Main Menu. Once on the Main Menu it can be set to checked-active status, and then be chosen using the Frequency Key.

Figure 44 – Selecting a Frequency to Activate

To switch to a “currently available” frequency that is not yet

“Checked-Active”, press the Menu Key and scroll down to the desired frequency; if it is not checked, press the Select Key to toggle the checkbox to “checked”. This sets the status of that frequency to “Checked-Active”. Press the Menu Key to return to the operating display, which will now be set to the frequency just activated. The NaviTrack II will show the chosen frequency and its icon on the left of the screen as the current “in-use” fre- quency.

“Checked-active” frequencies can be switched while the NaviTrack II is in use, by pressing the Frequency Key. When using the Frequency Key, the NaviTrack II will cycle down through the set of active frequencies from low to high, group by group, and repeat. Unchecking a fre- quency in the Main Menu will de-activate it, and then it will not appear when pressing the Frequency button.

NOTE! If a frequency appears missing, look to make sure it is in the Main Menu frequencies list. If it is present but unchecked, set it to “Checked- Active” status by highlighting it and pressing the Select Key. If it is not present, go to the Frequency Selection menu and the appropri- ate sub-category and select it there, checking the box to make it currently available in the Main Menu list. Make sure it is “checked” at both menu levels for it to appear in the current working set of frequencies.

Information Screen and Restoring Defaults

Information Screen

The information screen appears at the bottom of the Main Menu. Highlighting the Information icon and press- ing the Select button displays information about the lo- cator, including software version, serial number of the receiver and its calibration date.

Figure 45 – NaviTrack II Information Screen

Restore Factory Defaults

Pressing the Select Key a second time will display the Restore Factory Defaults option.

Figure 46 – Factory Defaults Selection

This option is turned on by selecting the checked box (√). If the “X” option is chosen, no change from current set- tings will be made.

24 Ridge Tool Company