Emerson 644 manual 00809-0400-4728, Rev AA

Page 84

 

 

 

Reference Manual

Rosemount 644

 

 

00809-0400-4728, Rev AA

 

 

June 2011

 

 

 

Table C-1. Resource Block Parameters and Descriptions

 

 

 

 

 

Index

 

 

Parameter

Number

Description

RB_SFTWR_REV_ALL

51

The string will contains the following fields:

 

 

Major rev: 1-3 characters, decimal number 0-255

 

 

Minor rev: 1-3 characters, decimal number 0-255

 

 

Build rev: 1-5 characters, decimal number 0-255

 

 

Time of build: 8 characters, xx:xx:xx, military time

 

 

Day of week of build: 3 characters, Sun, Mon,...

 

 

Month of build: 3 characters, Jan, Feb.

 

 

Day of month of build: 1-2 characters, decimal number 1-31

 

 

Year of build: 4 characters, decimal

 

 

Builder: 7 characters, login name of builder

RB_SFTWR_REV_BUILD

50

Build of software that the resource block was created with.

RB_SFTWR_REV_MAJOR

48

Major revision of software that the resource block was created with.

RB_SFTWR_REV_MINOR

49

Minor revision of software that the resource block was created with.

RECOMMENDED_ACTION

68

Enumerated list of recommended actions displayed with a device alert.

RESTART

16

Allows a manual restart to be initiated. Several degrees of restart are possible. They are

 

 

the following:

 

 

1

Run – nominal state when not restarting

 

 

2

Restart resource – not used

 

 

3

Restart with defaults – set parameters to default values. See

 

 

START_WITH_DEFAULTS below for which parameters are set.

 

 

4

Restart processor – does a warm start of CPU.

RS_STATE

07

State of the function block application state machine.

SAVE_CONFIG_BLOCKS

62

Number of EEPROM blocks that have been modified since last burn. This value will count

 

 

down to zero when the configuration is saved.

SAVE_CONFIG_NOW

61

Allows the user to optionally save all non-volatile information immediately.

SECURITY_IO

65

Status of security switch.

SELF_TEST

59

Instructs resource block to perform self-test. Tests are device specific.

SET_FSTATE

29

Allows the FAIL_SAFE condition to be manually initiated by selecting Set.

SHED_RCAS

26

Time duration at which to give up on computer writes to function block RCas locations.

 

 

Shed from RCas shall never happen when SHED_ROUT = 0

SHED_ROUT

27

Time duration at which to give up on computer writes to function block ROut locations.

 

 

Shed from ROut shall never happen when SHED_ROUT = 0

SIMULATE_IO

64

Status of simulate switch.

SIMULATE_STATE

66

The state of the simulate switch:

 

 

0

= Uninitialized

 

 

1

= Switch off, simulation not allowed

 

 

2

= Switch on, simulation not allowed (need to cycle jumper/switch)

 

 

3

= Switch on, simulation allowed

ST_REV

01

The revision level of the static data associated with the function block.

START_WITH_DEFAULTS

63

0

= Uninitialized

 

 

1

= do not power-up with NV defaults

 

 

2

= power-up with default node address

 

 

3

= power-up with default pd_tag and node address

 

 

4

= power-up with default data for the entire communications stack (no application data)

STRATEGY

03

The strategy field can be used to identify grouping of blocks.

SUMMARY_STATUS

56

An enumerated value of repair analysis.

TAG_DESC

02

The user description of the intended application of the block.

TEST_RW

08

Read/write test parameter - used only for conformance testing.

UPDATE_EVT

35

This alert is generated by any change to the static data.

WRITE_ALM

40

This alert is generated if the write lock parameter is cleared.

WRITE_LOCK

34

If set, no writes from anywhere are allowed, except to clear WRITE_LOCK. Block inputs

 

 

will continue to be updated.

WRITE_PRI

39

Priority of the alarm generated by clearing the write lock.

XD_OPTIONS

44

Indicates which transducer block licensing options are enabled.

C-4

Image 84
Contents Reference Manual 00809-0400-4728, Rev AA JunePage Table of Contents Specifications Reference Data Appendix aAppendix B TOC-2Rosemount Temperature Transmitters Customer Central National Response Center InternationalPage Safety Messages Section IntroductionExplosions could result in death or serious injury Process leaks could result in death or serious injuryOverview ManualTransmitter Considerations 22 20 815 C 1500 F Oven Temperature 250 C 482 F Oven Temperature 5 6 7 8 Extension LengthExample AboveSection Installation Within Specifications? Refer to Configuration Bench Calibration?Simulate Sensor Input From draining into the transmitter housing MountingMounting a 644H to a DIN Rail Rail asymmetricInstallation Typical European InstallationHead Mount Transmitter with DIN Plate Style Sensor Typical North American Installation Head Mount Transmitter with Threaded SensorLCD Display Installation Installing the LCD DisplayWiring Power terminals does not drop below 9 VdcSensor Connections Thermocouple or Millivolt InputsSensor Lead Wire Resistance Effect- RTD Input Sensor Input Approximate Basic ErrorRTD or Ohm Inputs Pt100 2-wire RTD Error due to amb. temp. var. of ± 25 CPower Supply Foundation fieldbus InstallationGround the Transmitter Ungrounded Thermocouple, mV, and RTD/Ohm InputsGrounded Thermocouple Inputs Section Configuration Overview Safety MessagesGeneral Block Information Device Description Node AddressModes AutoLink Active Scheduler Block Installation Resource Transducer Analog Input OtherCapabilities Foundation Fieldbus Function BlocksFeatures Resource BlockUnicode ReportsFeaturessel FailedalarmsMaxnotify PlantWeb AlertsMaintalarms FailedmaskAdvisory Alarms Recommended Actions for PlantWeb AlertsRecommendedaction Configure the AI block Sensor Transducer BlockAnalog Input AI Function Block DampingPressure Channel Temperature Channel LtypeXdscale and Outscale Configuration Examples Transducer BlockProcess Alarms FilteringAlarmtype OutdLCD Transducer Block DisplayparamselBLKTYPE#1 PARAMINDEX#1Operation and Maintenance OverviewUNITSTYPE#1 CUSTOMUNITS#1Troubleshooting Guides Troubleshooting guideProblems with communications flowchart Calpointlo + Calminspan Diagnostics Recall Factory TrimBlock Blockerr messages Sensor Transducer Block Xderr messagesDescription CalibrationerrManual Mode StatusSimulation SimulateTroubleshooting AI block Power UpSymptom Possible Causes Recommended Actions 00809-0400-4728, Rev AA June AI Blockerr ConditionsBlock Errors 8lists conditions reported in the Blockerr parameter10. Resource Block Condition NameSelf Test Procedure for the LCD Symptom Possible Causes Recommended ActionAuto Appendix a Specifications Reference Data SpecificationsFunctionalInputs Physical Performance Foundation Fieldbus Specifications Rosemount Conformance to SpecificationsFunction Blocks 2 σ -1 σPower Supply AlarmsBackup Link Active Scheduler LAS Software Upgrade in the FieldAccuracy Table A-1. Rosemount 644 Input Options and AccuracyAccuracy Example Ambient Temperature Effect Table A-2. Ambient Temperature EffectThermocouples Temperature Effects Examples Dimensional Drawings 644H DIN a Head MountLCD Display Mounting00809-0400-4728, Rev AA JuneSanitary Housing Covers LCD Display CoverRing 76.2 27.9 74.4 25.4 44.5 70.0 Ordering Information OptionsConfiguration Standard Alarm Level Configuration StandardAssemble To Options Standard Enclosure Options StandardTagging ConsiderationsTransmitter Configuration Configuration toolWith DeltaV, with AMS, or other Foundation fieldbus host or Standard Foundation fieldbus Configuration Custom ConfigurationRequirements Option Code Specification Standard Block ConfigurationCE Electromagnetic Compatibility Compliance Testing Appendix B Product CertificationsAtex Directive 94/9/EC Hazardous Locations Certificates North American CertificationsRosemount 644 with Foundation fieldbus Loop/Power Terminals Fisco Loop/Power TerminalsEuropean Certifications Special Conditions for Safe UseTemperature Class IECEx CertificationsTo 60 C Fisco Group IIC To 80 CTable B-3. Entity Parameters Transmitter I.S Transmitter Fisco SensorTransmitter Sensor Schedule of LimitationsUkraine Gost Pattern Approval for Measuring Instruments See CertificateApproval Temp Description Group CodeInstallation Drawings Rosemount Rosemount Rosemount 00809-0100-4728, Rev AA June Sheet 2 00809-0100-4728, Rev AA June Sheet 3 00809-0100-4728, Rev AA June 00809-0100-4728, Rev AA June Sheet 2 Rosemount Rosemount 00809-0100-4728, Rev AA June Sheet 2 00809-0100-4728, Rev AA June Sheet 3 Basic Setup Resource Block Appendix C Foundation fieldbus Block InformationDefinition Parameters and Descriptions IndexFailedenable FeaturesFeaturesel Maintenable00809-0400-4728, Rev AA Sensor Transducer Block Parameters DescriptionsDescription Effects transmitter operation Primaryvaluerange PrimaryvaluetypeSensrdetailedstatus CalvandusencoeffXderror SESNOR1DAMPINGTransducerdirectory TransducertypeAnalog Measurement Access Analog Input AI Function BlockOutd Cutoff Filter Convert CalcAI Parameter Table AckoptionLolopri LCD Transducer Block Table C-4. LCD Transducer Block Parameters and DescriptionsParameter Index Description PID Block Table C-5. PID Block Parameters and DescriptionsParameter Index Index Ungrounded Wiring MODEBLK.TARGET Bad UncertainLolim Lololim Lolopri Lopri Lower Trim Method DIN Rail Threaded SensorLimited Man Mode Unicode UNITSTYPE# Upper Trim Method Grounded Ungrounded WiringSecurity Self Test Direct Zero TrimIndex-4 Page Temperature GmbH Pacific Private Limited Emerson Process Management Rosemount Inc