Homelite HL80833 manuel dutilisation Assembly, Unpacking, Packing List

Page 12

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully cut the box down the sides then remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

WARNING:

Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

NOTE: This product is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed.

nInspect the product carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.

nIf any parts are damaged or missing, please call 1-866-340-3912 for assistance.

PACKING LIST

Pressure Washer

Trigger Handle

25 ft. High Pressure Hose

Self-Coiling Garden Hose

Spray Wand

Quick-Connect Nozzle (3)

Soap Blaster™ Nozzle

Nozzle Cleaning Tool

Nozzle Holder with Spring Clip

Injection Hose and Filter

Top Trigger Handle Holder

Bottom Trigger Handle Holder

Trigger Handle Holder Screws (4)

Trigger Handle Holder Nuts (4)

Handlebar

Surface cleaner

4-Cycle Engine Lubricant (SAE 10W30) Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

WARNING:

Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.

INSTALLing the handlebar

See Figures 2 - 3.

nRemove the acorn nuts and handle knobs from frame.

nRetract handle bolts until end of bolts are flush with handle spacers.

nInstall handlebar as shown. Handlebar should rest in grooves of spacers and holes in handlebar should align with handle bolts.

nPress handle bolts through openings in handlebar.

nRethread handle knobs on handle bolts and tighten to secure.

nRethread acorn nuts on end of handle bolts and tighten with wrench (not provided).

nPlace spray wand into storage clips located on the side of handlebar.

installing trigger handle holders

See Figures 4 - 5.

nPlace top trigger handle holder over handlebar and align holes.

nSecure using screws and nuts as shown.

nWhile holding screw with Phillips screwdriver, tighten each nut with wrench to secure.

nRepeat process to install bottom trigger handle holder.

nClip flat area of trigger handle into top holder and bottom ribbed area of trigger handle into bottom holder. Slide forward until trigger handle rests securely in holders.

nRotate trigger handle so that bottom edge of handle snaps into handle lock.

assembling the spray wand

See Figure 6.

nInsert the end of the spray wand into the trigger handle outlet coupler as shown in figure 6 and push together until coupler snaps into place.

8 — English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual DEL Operador Save this Manual for Future ReferenceJardín que se enrollaautomáticamente­ Cleaning deck pont de nettoyer, unidad de limpieza Iii Carrying handles poignées de transport, mangos de traslado Table of Contents Important safety instructions Read ALL InstructionsSpecific Safety Rules Symbols Symbol NameBLEACHES, SOLVENTS, Flammable MATERIAL, or Industrial Features Product SpecificationsSoap Blaster Nozzle Spark ArrestorAssembly UnpackingPacking List Trigger Handle Oxygenated Fuels Adding gasoline to the Fuel tankApplications Adding Lubricant to the engineUsing the spray wand trigger SELECTing the Right QUICK-CONNECT Nozzle for the JOBWashing with detergent Using the surface cleaner Rinsing with the pressure washerLifting and moving the pressure washer­ To lift the pressure washerMaintenance General MaintenanceNozzle maintenance Cleaning the air filterPeriodic maintenance schedule table Storing the pressure washerPreparing for use after storage Troubleshooting Problem Cause SolutionWarranty Limit ED NON Engine Warranty StatementEmission Related Parts Include the Following Instructions Importantes Concernant LA Sécurité AVERTISSEMENT Lire Toutes LES Instructions  Faire preuve de prudence pour éviter de glisser ou tomberRègles DE Sécurité Particulières Symboles Symbole Signal SignificationOU JAVÉLISÉS, NI DE Substances Inflammables OU DE Caractéristiques Entreposage DU Tuyau Flexible Haute PressionSoap Blaster Buse PARE-ÉTINCELLESAssemblage DéballageListe DE Contrôle Installation du tuyau d’injection Installation du plateau de nettoyageAssemblage de la lance d’arrosage Connexion du flexible haute pression sur la pompeUtilisation Carburants OxygénésAppoint lubrifiant Moteur Appoint D’ESSENCEMise en marche / arrêt du nettoyeur haute pression Fonctionnement poignée DE GâchetteNettoyage Avec DU Détergent Rinçage Avec LE Nettoyeur Haute PressionUtilisation du plateau de nettoyage Soulever et déplacer la laveuse à pressionEntretien Général Entretien de buseNettoyage DU Filtre À AIR Voir la figures 28Remise en service après remisage Remisage du nettoyeur haute pressionProblème Cause Solution DépannageGarantie Énoncé DE LA Garantie Limitée Hors MoteurII. Garantie DU Système Antipollution Instrucciones DE Seguridad Importantes AdvertenciaLEA Todas LAS Instrucciones Reglas DE Seguridad Específicas Símbolos PeligroPrecaución Soluciones ÁCIDAS, ALCALINAS, Blanqueadores Características Armado DesempaquetadoLista DE Empaquetado Instalación DE LOS Sujetadores DEL Mango DEL GatilloCóMO Conectar LA Manguera DE Alta PRESIóN a LA Bomba CóMO Conectar LA Manguera DE INyECCIóNInstalación DE LA Unidad DE Limpieza Para conectar una manguera de jardín a la máquinaFuncionamiento UsosAbASTECIMIENTO DE LubRICANTE DEL Motor Combustibles OxigenadosEncendido Y Apagado DE LA Lavadora DE Presión PrecauciónUso del mango del gatillo Lavado con detergenteEnjuagado CON LA Lavadora DE Presión USO DE LA Unidad DE LimpiezaCómo Levantar Y Mover LA Lavadora a Presión Mantenimiento Mantenimiento GeneralMantenimiento de las boquillas Limpieza DEL Filtro DE AireGuardado DE LA Lavadora DE Presión Tabla del programa periódico de mantenimientoSolución de problemas Problema Causa SoluciónGarantía Declaración DE Garantía Limitada no Aplicable AL MotorGarantía OPERATOR’S Manual Manuel D’UTILISATION Manual DEL OperadorLavadora a Presión DE Gasolina 3 EN 1 DE Alta Velocidad

HL80833 specifications

The Homelite HL80833 is a versatile and powerful gas-powered string trimmer designed for homeowners and landscaping professionals alike. With its lightweight design and robust performance, it has quickly gained popularity in the realm of outdoor gardening and lawn maintenance.

One of the standout features of the HL80833 is its 26cc, two-cycle engine. This engine provides a perfect balance of power and efficiency, allowing users to tackle tough weeds and overgrown lawns with ease. The trimmer's high-speed operation ensures that grass and weeds are trimmed quickly, saving time and effort.

Another significant advantage of the Homelite HL80833 is its ease of use. The trimmer is equipped with an automatic feed spool, which allows for continuous line feed while in operation. This feature eliminates the need for manual adjustments, letting users focus on their trimming tasks without interruption. The dual-line cutting system further enhances its efficiency, providing a 17-inch cutting width that covers more ground in a single pass.

Ergonomics and user comfort are also vital considerations in the design of the HL80833. The trimmer features a comfortable handlebar grip and adjustable harness that help minimize fatigue during extended use. Additionally, the lightweight structure of the unit makes it easy to maneuver around obstacles and tight spaces, making it an ideal choice for residential gardens and professional landscaping projects.

The Homelite HL80833 incorporates innovative technologies to ensure optimal performance, including a spring-assisted starting system. This feature allows for quick and easy start-up, reducing the frustration often associated with gas-powered equipment. The trimmer also comes with a durable housing that can withstand the rigors of outdoor use, and its design promotes better airflow for cooling, preventing overheating during prolonged operation.

Maintenance is simplified with the HL80833, as most components are easily accessible for cleaning and repairs. The trimmer's fuel efficiency and eco-friendly approach, thanks to lower emissions, make it a responsible choice for environmentally conscious users.

In summary, the Homelite HL80833 is an efficient and user-friendly string trimmer that combines powerful performance with ease of use. Its advanced features, lightweight design, and ergonomic considerations make it an excellent choice for anyone looking to maintain their outdoor spaces effectively. Whether for a home garden or a professional landscaping job, the HL80833 proves to be a reliable and capable tool in the hands of its users.
Top Page Image Contents