Husky HD1500 Manifold Assembly is leaking, Unit Water Water leaking anywhere from the Manifold

English

PROBLEM OR CONCERN	POSSIBLE CAUSE	SOLUTION
Leaking water from bottom	Manifold Assembly is leaking	Remove the front cover of the unit. If there is
of unit	water	water leaking anywhere from the Manifold
		please contact us at customerservice@hus
		kypowerwasher.com or order a replace-
		ment directly online at www.huskypowe-
		rwasher.com.
	Pump housing is leaking water	Email us at customerservice@huskypow
		erwasher.com for assistance.
Low pressure	Faucet not fully open or unit is	Open the faucet all the way.
	not receiving a full volume of
	water
Not building maximum	Screen Filter is clogged	Clean the Screen filter as instructed in the sec-
pressure		tion 6.4.
Irregular pressure	Gun or Hose failure	Replace Gun and/or Hose. Contact us at c
		ustomerservice@huskypowerwasher.
		com or order online at www.huskypowe-
		rwasher.com.
	Kink in the Garden Hose or Hose	Unwrap the Garden Hose and lay it out flat to
	is wrapped on a storage wheel	ensure that there are no kinks in the Hose.
	Water leaking from either Hose	Stop water from leaking before using the unit
	or Unit	or contact us if you need assistance.
	Garden Hose length is too long	Shorten the length of the Garden Hose. We
		recommend a maximum length of 25 to 50
		feet for City water supply and 30 feet for Well
		water supply.
	Clogged Nozzle	Clean the Nozzle as instructed in section 6.2.
	Air in Pump	Let Pressure washer run with Gun trigger de-
		pressed and Wand removed until a steady
		stream of water is released.
	No Wand attached to the front	Attach either the Turbo or Adjustable Wand to
	of the Gun	the front of the Gun. (High Pressure is created
		with the Wand and not the Gun).
No water coming out of	Clogged Nozzle	Clean Nozzle as instructed in section 6.2.
Wand
	Quick Connect is attached in-	To Attach Quick Connect properly, keep the
	correctly	outer collar of the Quick Connect held back
		while sliding the Quick Connect all the way
		forward against the Inlet Nipple and then re-
		lease the collar to lock it into place. (The collar
		is spring loaded so if it is released too soon it
		will not lock into place).
	Sceen Filter is clogged	Clean the Sceen filter as instructed in section 6.4.
	Kink in the Garden Hose or	Unwrap the Garden Hose and lay it out flat to
	Hose is wrapped on a storage	ensure that there are no kinks in the Hose.
	wheel

19