Husky HD1500 warranty Wand Attaching To attach the Wand apply some moderate, Wand Removing

English

PROBLEM OR CONCERN	POSSIBLE CAUSE	SOLUTION
Wand - Attaching		To attach the Wand apply some moderate
		downward pressure on the Wand (In the direction
		of the trigger) while simultaneously twisting the
		wand a 1/4 of a turn counterclockwise. (It may
		help if you set the gun vertically on a flat surface
		with the wand pointing upwards). The two tabs on
		the end of the Wand must slide all the way in before
		the Wand will twist and lock. If this does not work
		remove the o-ring from the end of the wand and
		attach it without the o-ring. If the wand attaches,
		you will need to replace the o-ring. Contact us at
		customerservice@huskypowerwasher.
		com or order a replacement directly online at
		www.huskypowerwasher.com.
Wand - Removing		Release the back pressure in the Gun/Hose. Re-
		move the Garden Hose from the unit and squee-
		ze the trigger of the Gun. Apply some moderate
		downward pressure on the Wand (In the direc-
		tion of the trigger) while simultaneously twisting
		the wand a 1/4 of a turn clockwise. (It may help
		if you set the gun vertically on a flat surface with
		the Wand pointing upwards). For additional as-
		sistance you can email us at customerservice
		@huskypowerwasher.com.

21