Briggs & Stratton manual How to Stop Your Pressure Washer, To start engine thereafter

Page 13

To start the engine for the very first time:

9A. Push primer bulb firmly 5 times, waiting 2 seconds between each push.

To start engine thereafter:

9B. Press primer bulb firmly 3 times, waiting 2 seconds between each push. For a warm engine, DO NOT press primer bulb.

IMPORTANT: Before starting the pressure washer, be sure you are wearing adequate safety goggles.

WARNING

Risk of eye injury.

Spray can splash back or propel objects.

•Always wear safety goggles when using this equipment or in vicinity of where equipment is in use.

•Before starting the pressure washer, be sure you are wearing adequate safety goggles.

•NEVER substitute safety glasses for safety goggles.

10.When starting engine, position yourself as recommended below and grasp starter grip handle and pull slowly until you feel some resistance. Then pull rapidly to start engine.

WARNING

Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

•NEVER pull starter cord without first relieving spray gun pressure.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•After each starting attempt, where engine fails to run, always point spray gun in safe direction, press red button and squeeze spray gun trigger to release high pressure.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back.

11.Return starter grip handle slowly. DO NOT let rope “snap back” against starter.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•DO NOT allow CHILDREN to operate pressure washer.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•NEVER aim spray gun at people, animals, or plants.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

NOTE: Always keep the throttle lever in the “Fast” position when operating the pressure washer.

How to Stop Your Pressure Washer

1.Release spray gun trigger and let engine idle for two minutes.

2.Move throttle to SLOW position, then STOP position (A).

A

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator’s Manual Pressure Washer Where to Find UsEngine Date PurchasedTable of Contents Safety Rules Operator SafetyHazard Symbols and Meanings Equipment DescriptionOperate pressure washer only outdoors Certain components in this product and relatedContact with muffler area can result in serious burns Broken bones, fractures, bruises, or sprains could resultUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Risk of eye injury Spray can splash back or propel objectsAttach Handle and Accessory Tray AssemblyUnpack Pressure Washer Items in the carton includeAdd Fuel Add Engine OilFuel must meet these requirements High AltitudeConnect Hose and Water Supply to Pump Checklist Before Starting EngineFeatures and Controls Operation How to Start Your Pressure WasherPressure Washer Location Clearances and Air MovementTo start the engine for the very first time How to Stop Your Pressure WasherTo start engine thereafter How to Use ProjectPro Nozzle System How to Use Accessory TrayFollow these instructions to change ProjectPro nozzles Usage Tips Applying DetergentTo apply detergent, follow these steps Pressure Washer Rinsing Cleaning Detergent Siphoning TubeAutomatic Cool Down System Thermal Relief For RinsingMaintenance Schedule MaintenancePressure Washer Maintenance Ring Maintenance Nozzle MaintenanceCheck High Pressure Hose Check Detergent Siphoning TubeOil Oil Recommendations Engine MaintenanceChecking Oil Level Adding Engine OilTo service the air cleaner, follow these steps Service Air CleanerService Spark Plug Spark Arrester ServiceAir Cooling System After Each UseKeep areas within heavy line clear of debris Long Term Storage Winter StorageProblem Cause Correction TroubleshootingOwner’s Warranty Responsibilities Emissions Control System WarrantyWarranties Emission Information MaintenanceClaims and Coverage Exclusions Limited Warranty Page Common Service Parts Product Specifications800 Manuel d’utilisation Nettoyeur à pression Où nous trouverMoteur Date d’achatSécurité de l’opérateur Fonctions et commandes OpérationAssemblage EntretienSécurité de l’opérateur Symboles de danger et moyensDescription de l équipement Règles de sécuritéCertains composants de ce produit ainsi que les AvertissementLorsque Vous Réglez OU Réparez Votre Nettoyeur À Pression Unintentional peut résulter dans feu ou électriqueAvis Assemblage Fixation de la poignée et du plateau pour accessoiresDéballage du nettoyeur à pression Les articles dans la boîte incluentAjoutez de lessence Ajoutez de lhuile à moteur’essence satisfait les exigences suivantes Altitude élevéeFournissez de leau à une cadence appropriée Liste de vérifications avant de démarrer le moteurFonctions et commandes Opération Emplacement de la nettoyeur à pressionMettre votre nettoyeur à pression en marche Dégagement de la nettoyeur à pressionPar la suite, pour démarrer le moteur Pour démarrer le moteur pour la première foisComment arrêter votre nettoyeur à pression Comment utiliser le plateau pour accessoiresComment utiliser le système de buse ProjectPro Basse pressionUn nettoyage en douceur des automobiles/camions Application de détergentConseils dutilisation Pour appliquer des produits détergents, procédez comme suitTube de siphonnement du détergent Rincer le nettoyeur à pressionPour rincer Calendrier d’entretien EntretienEntretien du nettoyeur à pression Vérifiez le tube de siphonnement du détergent Vérifiez le tuyau à haute pressionVérifiez le pistolet et la rallonge de gicleur réglable Entretien du gicleurEntretien du joint torique Entretien du moteurHuile Vérification du niveau dhuileEntretien du filtre à air Vidange de lhuile moteurPour faire lentretien du filtre à air, procédez comme suit Entretien de la bougie dallumageSystème de refroidissement à air Après chaque utilisationEntreposez le nettoyeur dans un endroit propre et sec Entreposage à long terme Entreposage pour lhiverDeau DépannageGarantie du dispositif antipollution GarantiesResponsabilités de la garantie du propriétaire Aucun frais Durée de la couvertureRéclamations et exclusions de couverture EntretienGarantie Limitée Page Pièces d’entretien courant Caractéristiques du produit

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents