Briggs & Stratton Pressure Washer How to Use Accessory Tray, How to Use ProjectPro Nozzle System

Page 14

3.ALWAYS point gun in a safe direction and press red button and squeeze spray gun trigger to release retained high water pressure.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•After each starting attempt, where engine fails to run, always point spray gun in safe direction, press red button and squeeze spray gun trigger to release high pressure.

How to Use Accessory Tray

The unit is equipped with an accessory tray with places to store your spray gun, nozzle extension and ProjectPro™ nozzles. There is also a hook at the front of the accessory tray to hold your high pressure hose.

NOTE: The extra hole in the tray is for storing a utility brush. The extra clip in the tray is for storing a turbo nozzle. The brush and turbo nozzle are NOT included with your pressure washer. You can buy these items as optional accessories.

1.Place nozzle extension through hole on accessory tray as shown.

2.Place spray gun through hole on accessory tray on right side of unit as shown.

3.Hang high pressure hose on hook attached to accessory tray on front of tray as shown.

4.Insert multi–colored ProjectPro™ nozzles in spaces provided in accessory tray.

How to Use ProjectPro™ Nozzle System

The quick–connect on the nozzle extension allows you to switch between four different ProjectPro™ system nozzles. ProjectPro™ nozzles can be changed while pressure washer is running once spray gun trigger lock is engaged. The ProjectPro™ nozzles vary the pressure and spray pattern as shown.

 

Low Pressure

 

 

Black

 

 

Use to apply

 

detergent

 

High Pressure

 

Delicate

General

Max

40° Yellow

15° Orange

0° Red

1650 PSI

1950 PSI

2200 PSI

2.2 GPM

2.1 GPM

1.9 GPM

Follow these instructions to change ProjectPro™ nozzles:

1.Pull back collar on quick–connect and pull current ProjectPro™ nozzles off. Store ProjectPro™ nozzles in holder provided on the accessory tray.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

•NEVER exchange nozzles without the trigger locked on the spray gun.

•DO NOT twist nozzles while spraying.

14

BRIGGSandSTRATTON.COM

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Engine Where to Find UsPressure Washer Date PurchasedTable of Contents Hazard Symbols and Meanings Operator SafetySafety Rules Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsUnintentional sparking can result in fire or electric shock Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassUnpack Pressure Washer AssemblyAttach Handle and Accessory Tray Items in the carton includeFuel must meet these requirements Add Engine OilAdd Fuel High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls Pressure Washer Location How to Start Your Pressure WasherOperation Clearances and Air MovementTo start engine thereafter How to Stop Your Pressure WasherTo start the engine for the very first time Follow these instructions to change ProjectPro nozzles How to Use Accessory TrayHow to Use ProjectPro Nozzle System To apply detergent, follow these steps Applying DetergentUsage Tips Automatic Cool Down System Thermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing For RinsingPressure Washer Maintenance MaintenanceMaintenance Schedule Check High Pressure Hose Nozzle MaintenanceRing Maintenance Check Detergent Siphoning TubeChecking Oil Level Engine MaintenanceOil Oil Recommendations Adding Engine OilService Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Spark Arrester ServiceKeep areas within heavy line clear of debris After Each UseAir Cooling System Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionWarranties Emissions Control System WarrantyOwner’s Warranty Responsibilities Claims and Coverage Exclusions MaintenanceEmission Information Limited Warranty Page 800 Product SpecificationsCommon Service Parts Manuel d’utilisation Moteur Où nous trouverNettoyeur à pression Date d’achatAssemblage Fonctions et commandes OpérationSécurité de l’opérateur EntretienDescription de l équipement Symboles de danger et moyensSécurité de l’opérateur Règles de sécuritéAvertissement Certains composants de ce produit ainsi que lesUnintentional peut résulter dans feu ou électrique Lorsque Vous Réglez OU Réparez Votre Nettoyeur À PressionAvis Déballage du nettoyeur à pression Fixation de la poignée et du plateau pour accessoiresAssemblage Les articles dans la boîte incluent’essence satisfait les exigences suivantes Ajoutez de lhuile à moteurAjoutez de lessence Altitude élevéeListe de vérifications avant de démarrer le moteur Fournissez de leau à une cadence appropriéeFonctions et commandes Mettre votre nettoyeur à pression en marche Emplacement de la nettoyeur à pressionOpération Dégagement de la nettoyeur à pressionPour démarrer le moteur pour la première fois Par la suite, pour démarrer le moteurComment utiliser le système de buse ProjectPro Comment utiliser le plateau pour accessoiresComment arrêter votre nettoyeur à pression Basse pressionConseils dutilisation Application de détergentUn nettoyage en douceur des automobiles/camions Pour appliquer des produits détergents, procédez comme suitPour rincer Rincer le nettoyeur à pressionTube de siphonnement du détergent Entretien du nettoyeur à pression EntretienCalendrier d’entretien Vérifiez le pistolet et la rallonge de gicleur réglable Vérifiez le tuyau à haute pressionVérifiez le tube de siphonnement du détergent Entretien du gicleurHuile Entretien du moteurEntretien du joint torique Vérification du niveau dhuilePour faire lentretien du filtre à air, procédez comme suit Vidange de lhuile moteurEntretien du filtre à air Entretien de la bougie dallumageEntreposez le nettoyeur dans un endroit propre et sec Après chaque utilisationSystème de refroidissement à air Entreposage pour lhiver Entreposage à long termeDépannage DeauResponsabilités de la garantie du propriétaire GarantiesGarantie du dispositif antipollution Réclamations et exclusions de couverture Durée de la couvertureAucun frais EntretienGarantie Limitée Page Caractéristiques du produit Pièces d’entretien courant

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents