Briggs & Stratton Pressure Washer manual Warranties, Emissions Control System Warranty

Page 24

Warranties

Emissions Control System Warranty

Briggs & Stratton Corporation (B&S), the California Air Resources Board (CARB) and the United States Environmental Protection Agency (U.S. EPA)

Emissions Control System Warranty Statement (Owner’s Defect Warranty Rights and Obligations)

California, United States and Canada Emissions Control Defects Warranty Statement

The California Air Resources Board (CARB), U.S. EPA and B&S are pleased to explain the Emissions Control System Warranty on your small off-road engine (SORE). In California, new small off-road engines model year 2006 and later must be designed, built and equipped to meet the State’s stringent anti-smog standards. Elsewhere in the United States, new non-road, spark-ignition engines certified for model year 1997 and later must meet similar standards set forth by the U.S. EPA. B&S must warrant the emissions control system on your engine for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your small off-road engine.

Your emissions control system includes parts such as the carburetor, air cleaner, ignition system, fuel line, muffler and catalytic converter. Also included may be connectors and other emissions related assemblies.

Where a warrantable condition exists, B&S will repair your small off-road engine at no cost to you including diagnosis, parts and labor.

Briggs & Stratton Emissions Control Defects Warranty Coverage

Small off-road engines are warranted relative to emissions control parts defects for a period of two years, subject to provisions set forth below. If any covered part on your engine is defective, the part will be repaired or replaced by B&S.

Owner’s Warranty Responsibilities

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your Operating and Maintenance Instructions. B&S recommends that you retain all your receipts covering maintenance on your small off-road engine, but B&S cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should however be aware that B&S may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your small off-road engine to an Authorized B&S Service Dealer as soon as a problem exists. The undisputed warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a B&S Service Representative at (414) 259-5262.

The emissions warranty is a defects warranty. Defects are judged on normal engine performance. The warranty is not related to an in-use emissions test.

Briggs & Stratton Emissions Control Defects Warranty Provisions

The following are specific provisions relative to your Emissions Control Defects Warranty Coverage. It is in addition to the B&S engine warranty for non-regulated engines found in the Operator’s Manual.

1.Warranted Parts

Coverage under this warranty extends only to the parts listed below (the emissions control systems parts) to the extent these parts were present on the engine purchased.

a.Fuel Metering System

•Cold start enrichment system (soft choke)

•Carburetor and internal parts

•Fuel Pump

•Fuel line, fuel line fittings, clamps

•Fuel tank, cap and tether

•Carbon canister

b.Air Induction System

•Air cleaner

•Intake manifold

•Purge and vent line

c.Ignition System

•Spark plug(s)

•Magneto ignition system

d.Catalyst System

•Catalytic converter

•Exhaust manifold

•Air injection system or pulse valve

e.Miscellaneous Items Used in Above Systems

•Vacuum, temperature, position, time sensitive valves and switches

•Connectors and assemblies

24

BRIGGSandSTRATTON.COM

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operator’s Manual Where to Find Us Pressure WasherEngine Date PurchasedTable of Contents Operator Safety Safety RulesHazard Symbols and Meanings Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsBroken bones, fractures, bruises, or sprains could result Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAssembly Attach Handle and Accessory TrayUnpack Pressure Washer Items in the carton includeAdd Engine Oil Add FuelFuel must meet these requirements High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls How to Start Your Pressure Washer OperationPressure Washer Location Clearances and Air MovementHow to Stop Your Pressure Washer To start the engine for the very first timeTo start engine thereafter How to Use Accessory Tray How to Use ProjectPro Nozzle SystemFollow these instructions to change ProjectPro nozzles Applying Detergent Usage TipsTo apply detergent, follow these steps Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief For RinsingMaintenance Maintenance SchedulePressure Washer Maintenance Nozzle Maintenance Ring MaintenanceCheck High Pressure Hose Check Detergent Siphoning TubeEngine Maintenance Oil Oil RecommendationsChecking Oil Level Adding Engine OilService Air Cleaner To service the air cleaner, follow these stepsService Spark Plug Spark Arrester ServiceAfter Each Use Air Cooling SystemKeep areas within heavy line clear of debris Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionEmissions Control System Warranty Owner’s Warranty ResponsibilitiesWarranties Maintenance Emission InformationClaims and Coverage Exclusions Limited Warranty Page Product Specifications Common Service Parts800 Manuel d’utilisation Où nous trouver Nettoyeur à pressionMoteur Date d’achatFonctions et commandes Opération Sécurité de l’opérateurAssemblage EntretienSymboles de danger et moyens Sécurité de l’opérateurDescription de l équipement Règles de sécuritéAvertissement Certains composants de ce produit ainsi que lesUnintentional peut résulter dans feu ou électrique Lorsque Vous Réglez OU Réparez Votre Nettoyeur À PressionAvis Fixation de la poignée et du plateau pour accessoires AssemblageDéballage du nettoyeur à pression Les articles dans la boîte incluentAjoutez de lhuile à moteur Ajoutez de lessence’essence satisfait les exigences suivantes Altitude élevéeListe de vérifications avant de démarrer le moteur Fournissez de leau à une cadence appropriéeFonctions et commandes Emplacement de la nettoyeur à pression OpérationMettre votre nettoyeur à pression en marche Dégagement de la nettoyeur à pressionPour démarrer le moteur pour la première fois Par la suite, pour démarrer le moteurComment utiliser le plateau pour accessoires Comment arrêter votre nettoyeur à pressionComment utiliser le système de buse ProjectPro Basse pressionApplication de détergent Un nettoyage en douceur des automobiles/camionsConseils dutilisation Pour appliquer des produits détergents, procédez comme suitRincer le nettoyeur à pression Tube de siphonnement du détergentPour rincer Entretien Calendrier d’entretienEntretien du nettoyeur à pression Vérifiez le tuyau à haute pression Vérifiez le tube de siphonnement du détergentVérifiez le pistolet et la rallonge de gicleur réglable Entretien du gicleurEntretien du moteur Entretien du joint toriqueHuile Vérification du niveau dhuileVidange de lhuile moteur Entretien du filtre à airPour faire lentretien du filtre à air, procédez comme suit Entretien de la bougie dallumageAprès chaque utilisation Système de refroidissement à airEntreposez le nettoyeur dans un endroit propre et sec Entreposage pour lhiver Entreposage à long termeDépannage DeauGaranties Garantie du dispositif antipollutionResponsabilités de la garantie du propriétaire Durée de la couverture Aucun fraisRéclamations et exclusions de couverture EntretienGarantie Limitée Page Caractéristiques du produit Pièces d’entretien courant

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents