Briggs & Stratton Pressure Washer Engine Maintenance, Oil Oil Recommendations, Checking Oil Level

Page 19

Engine Maintenance

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

Oil

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty Certified oils for best performance. Other high-quality detergent oils are acceptable if classified for service SF, SG, SH, SJ or higher. DO NOT use special additives.

Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best viscosity for the outdoor temperature range expected.

* Below 40°F (4°C) the use of SAE 30 will result in hard starting.

**Above 80°F (27°C) the use of 10W30 may cause increased oil consumption. Check oil level more frequently.

NOTE: Synthetic oil meeting ILSAC GF-2, API

certification mark and API service symbol with

“SJ/CF ENERGY CONSERVING” or higher, is an

acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.

Checking Oil Level

Oil level should be checked prior to each use or at least every 8 hours of operation. Keep oil level maintained.

1.Make sure pressure washer is on a level surface.

2.Remove oil dipstick and wipe dipstick with clean cloth. Replace and tighten dipstick. Remove and and check oil level.

3.Verify oil is at “Full” mark on dipstick. Replace and tighten dipstick.

Adding Engine Oil

1.Make sure pressure washer is on a level surface.

2.Check oil level as described in Checking Oil Level.

3.If needed, slowly pour oil into oil fill opening to the “Full” mark on dipstick. DO NOT overfill.

NOTICE

Overfilling with oil may cause the engine to not start, or hard starting.

•DO NOT overfill.

•If over the FULL mark on dipstick, drain oil to reduce oil level to FULL mark on dipstick.

4.Replace and tighten dipstick.

Changing Engine Oil

Change the engine oil after the first 5 hours and every

50 hours thereafter. If you are using your pressure washer under extremely dirty or dusty conditions, or in extremely hot weather, change the oil more often.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

•Used motor oil has been shown to cause skin cancer in certain laboratory animals.

•Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON’T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operator’s Manual Date Purchased Where to Find UsPressure Washer EngineTable of Contents Equipment Description Operator SafetySafety Rules Hazard Symbols and MeaningsOperate pressure washer only outdoors Certain components in this product and relatedContact with muffler area can result in serious burns Broken bones, fractures, bruises, or sprains could resultUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Risk of eye injury Spray can splash back or propel objectsItems in the carton include AssemblyAttach Handle and Accessory Tray Unpack Pressure WasherHigh Altitude Add Engine OilAdd Fuel Fuel must meet these requirementsConnect Hose and Water Supply to Pump Checklist Before Starting EngineFeatures and Controls Clearances and Air Movement How to Start Your Pressure WasherOperation Pressure Washer LocationTo start the engine for the very first time How to Stop Your Pressure WasherTo start engine thereafter How to Use ProjectPro Nozzle System How to Use Accessory TrayFollow these instructions to change ProjectPro nozzles Usage Tips Applying DetergentTo apply detergent, follow these steps For Rinsing Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down System Thermal ReliefMaintenance Schedule MaintenancePressure Washer Maintenance Check Detergent Siphoning Tube Nozzle MaintenanceRing Maintenance Check High Pressure HoseAdding Engine Oil Engine MaintenanceOil Oil Recommendations Checking Oil LevelSpark Arrester Service Service Air CleanerTo service the air cleaner, follow these steps Service Spark PlugAir Cooling System After Each UseKeep areas within heavy line clear of debris Long Term Storage Winter StorageProblem Cause Correction TroubleshootingOwner’s Warranty Responsibilities Emissions Control System WarrantyWarranties Emission Information MaintenanceClaims and Coverage Exclusions Limited Warranty Page Common Service Parts Product Specifications800 Manuel d’utilisation Date d’achat Où nous trouverNettoyeur à pression MoteurEntretien Fonctions et commandes OpérationSécurité de l’opérateur AssemblageRègles de sécurité Symboles de danger et moyensSécurité de l’opérateur Description de l équipementCertains composants de ce produit ainsi que les AvertissementLorsque Vous Réglez OU Réparez Votre Nettoyeur À Pression Unintentional peut résulter dans feu ou électriqueAvis Les articles dans la boîte incluent Fixation de la poignée et du plateau pour accessoiresAssemblage Déballage du nettoyeur à pressionAltitude élevée Ajoutez de lhuile à moteurAjoutez de lessence ’essence satisfait les exigences suivantesFournissez de leau à une cadence appropriée Liste de vérifications avant de démarrer le moteurFonctions et commandes Dégagement de la nettoyeur à pression Emplacement de la nettoyeur à pressionOpération Mettre votre nettoyeur à pression en marchePar la suite, pour démarrer le moteur Pour démarrer le moteur pour la première foisBasse pression Comment utiliser le plateau pour accessoiresComment arrêter votre nettoyeur à pression Comment utiliser le système de buse ProjectProPour appliquer des produits détergents, procédez comme suit Application de détergentUn nettoyage en douceur des automobiles/camions Conseils dutilisationTube de siphonnement du détergent Rincer le nettoyeur à pressionPour rincer Calendrier d’entretien EntretienEntretien du nettoyeur à pression Entretien du gicleur Vérifiez le tuyau à haute pressionVérifiez le tube de siphonnement du détergent Vérifiez le pistolet et la rallonge de gicleur réglableVérification du niveau dhuile Entretien du moteurEntretien du joint torique HuileEntretien de la bougie dallumage Vidange de lhuile moteurEntretien du filtre à air Pour faire lentretien du filtre à air, procédez comme suitSystème de refroidissement à air Après chaque utilisationEntreposez le nettoyeur dans un endroit propre et sec Entreposage à long terme Entreposage pour lhiverDeau DépannageGarantie du dispositif antipollution GarantiesResponsabilités de la garantie du propriétaire Entretien Durée de la couvertureAucun frais Réclamations et exclusions de couvertureGarantie Limitée Page Pièces d’entretien courant Caractéristiques du produit

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents