Briggs & Stratton Pressure Washer Rinsing, Cleaning Detergent Siphoning Tube, For Rinsing

Page 16

4. Make sure black detergent nozzle is installed.

NOTE: Detergent cannot be applied with the high pressure ProjectPro™ nozzle (Orange, Yellow or Red).

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Turn on water.

NOTICE

You must attach all hoses before you start the engine.

•Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

6.Start engine following instructions How to Start Your Pressure Washer.

7.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

8.Allow detergent to "soak in" for 3-5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. DO NOT allow detergent to dry on (prevents streaking).

IMPORTANT: You must flush the detergent siphoning system after each use by placing the filter into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.

Pressure Washer Rinsing

For Rinsing:

1.Remove black detergent nozzle from nozzle extension.

2.Select and install desired high pressure nozzle following instructions How to Use ProjectPro™ Nozzle System.

3.Keep the spray gun a safe distance from the area you plan to spray.

WARNING

Kickback from spray gun can cause you to fall.

•Operate pressure washer from a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding, or any other similar location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back.

4.Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.

5.Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.

Cleaning Detergent Siphoning Tube

If you used the detergent siphoning tube, you must flush it with clean water before stopping the engine.

1.Place detergent siphoning tube/filter in a bucket full of clean water.

2.Remove high pressure nozzle from nozzle extension.

3.Select and install black detergent nozzle following instructions How to Use ProjectPro™ Nozzle System.

4.Flush for 1-2 minutes.

5.Shut off engine following instructions How to Stop Pressure Washer and turn off water supply.

6.ALWAYS point gun in a safe direction and press red button and squeeze spray gun trigger to release retained high water pressure.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•After each starting attempt, where engine fails to run, always point spray gun in safe direction, press red button and squeeze spray gun trigger to release high pressure.

Automatic Cool Down System (Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F. The system engages to cool the pump by discharging

the warm water onto the ground.

16

BRIGGSandSTRATTON.COM

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operator’s Manual Where to Find Us Pressure WasherEngine Date PurchasedTable of Contents Operator Safety Safety RulesHazard Symbols and Meanings Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsContact with muffler area can result in serious burns Broken bones, fractures, bruises, or sprains could resultUnintentional sparking can result in fire or electric shock Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAssembly Attach Handle and Accessory TrayUnpack Pressure Washer Items in the carton includeAdd Engine Oil Add FuelFuel must meet these requirements High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls How to Start Your Pressure Washer OperationPressure Washer Location Clearances and Air MovementTo start the engine for the very first time How to Stop Your Pressure WasherTo start engine thereafter How to Use ProjectPro Nozzle System How to Use Accessory TrayFollow these instructions to change ProjectPro nozzles Usage Tips Applying DetergentTo apply detergent, follow these steps Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief For RinsingMaintenance Schedule MaintenancePressure Washer Maintenance Nozzle Maintenance Ring MaintenanceCheck High Pressure Hose Check Detergent Siphoning TubeEngine Maintenance Oil Oil RecommendationsChecking Oil Level Adding Engine OilService Air Cleaner To service the air cleaner, follow these stepsService Spark Plug Spark Arrester ServiceAir Cooling System After Each UseKeep areas within heavy line clear of debris Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionOwner’s Warranty Responsibilities Emissions Control System WarrantyWarranties Emission Information MaintenanceClaims and Coverage Exclusions Limited Warranty Page Common Service Parts Product Specifications800 Manuel d’utilisation Où nous trouver Nettoyeur à pressionMoteur Date d’achatFonctions et commandes Opération Sécurité de l’opérateurAssemblage EntretienSymboles de danger et moyens Sécurité de l’opérateurDescription de l équipement Règles de sécuritéAvertissement Certains composants de ce produit ainsi que lesUnintentional peut résulter dans feu ou électrique Lorsque Vous Réglez OU Réparez Votre Nettoyeur À PressionAvis Fixation de la poignée et du plateau pour accessoires AssemblageDéballage du nettoyeur à pression Les articles dans la boîte incluentAjoutez de lhuile à moteur Ajoutez de lessence’essence satisfait les exigences suivantes Altitude élevéeListe de vérifications avant de démarrer le moteur Fournissez de leau à une cadence appropriéeFonctions et commandes Emplacement de la nettoyeur à pression OpérationMettre votre nettoyeur à pression en marche Dégagement de la nettoyeur à pressionPour démarrer le moteur pour la première fois Par la suite, pour démarrer le moteurComment utiliser le plateau pour accessoires Comment arrêter votre nettoyeur à pressionComment utiliser le système de buse ProjectPro Basse pressionApplication de détergent Un nettoyage en douceur des automobiles/camionsConseils dutilisation Pour appliquer des produits détergents, procédez comme suitTube de siphonnement du détergent Rincer le nettoyeur à pressionPour rincer Calendrier d’entretien EntretienEntretien du nettoyeur à pression Vérifiez le tuyau à haute pression Vérifiez le tube de siphonnement du détergentVérifiez le pistolet et la rallonge de gicleur réglable Entretien du gicleurEntretien du moteur Entretien du joint toriqueHuile Vérification du niveau dhuileVidange de lhuile moteur Entretien du filtre à airPour faire lentretien du filtre à air, procédez comme suit Entretien de la bougie dallumageSystème de refroidissement à air Après chaque utilisationEntreposez le nettoyeur dans un endroit propre et sec Entreposage pour lhiver Entreposage à long termeDépannage DeauGarantie du dispositif antipollution GarantiesResponsabilités de la garantie du propriétaire Durée de la couverture Aucun fraisRéclamations et exclusions de couverture EntretienGarantie Limitée Page Caractéristiques du produit Pièces d’entretien courant

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents