Briggs & Stratton Pressure Washer Service Air Cleaner, Service Spark Plug, Spark Arrester Service

Page 20

Change oil while engine is still warm from running, as follows:

1.Drain fuel tank by running pressure washer until fuel tank is empty.

2.Disconnect spark plug wire and keep it away from spark plug.

3.Clean area around oil fill, remove oil fill cap/dipstick. Wipe dipstick clean.

4.Tip your pressure washer to drain oil from oil fill into a suitable container making sure you tip your unit away from spark plug. When crankcase is empty, return pressure washer to upright position.

5.Slowly pour recommended oil (about 20 oz. (0.6 l)) into oil fill opening. Pause to permit oil to settle. Fill to “Full” mark on dipstick.

6.Wipe dipstick clean each time oil level is checked. DO NOT overfill.

7.Replace and tighten dipstick.

8.Wipe up any remaining oil.

9.Reconnect spark plug wire to spark plug.

Service Air Cleaner

Your engine will not run properly and may be damaged if you run it with a dirty air cleaner.

Service the air cleaner once every 25 hours of operation or once each year, whichever comes first. Service more often if operating under dirty or dusty conditions.

To service the air cleaner, follow these steps:

1. Remove screw (A).

A

B C

2.Carefully remove air cleaner assembly to prevent debris from falling into carburetor.

3.Take air cleaner assembly apart and clean all parts. Wash foam air cleaner (B) in liquid detergent and water. Squeeze dry in a clean cloth.

4.SATURATE foam air cleaner in engine oil and squeeze in a clean cloth to remove excess oil.

5.Reinstall clean or new foam air cleaner in base (C).

6.Install air cleaner securely on carburetor with screw.

Service Spark Plug

Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better.

1.Clean area around spark plug.

2.Remove and inspect spark plug.

3.Replace spark plug if electrodes are pitted, burned or porcelain is cracked. Use the recommended replacement plug. See Specifications.

4.Check electrode gap with wire feeler gauge and reset spark plug gap to recommended gap if necessary (see Specifications).

5. Install spark plug and tighten firmly.

Spark Arrester Service

Your engine is not factory-equipped with a spark arrester. In some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations. A spark arrester is available from your nearest qualified service center.The spark arrester must be serviced every 50 hours to keep it functioning as designed.

If the engine has been running, the muffler will be very hot. Allow the muffler to cool before servicing spark arrester.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

•Remove spark arrester screen for cleaning and inspection.

•Replace if screen is damaged.

20

BRIGGSandSTRATTON.COM

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator’s Manual Where to Find Us Pressure WasherEngine Date PurchasedTable of Contents Operator Safety Safety RulesHazard Symbols and Meanings Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsUnintentional sparking can result in fire or electric shock Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAssembly Attach Handle and Accessory TrayUnpack Pressure Washer Items in the carton includeAdd Engine Oil Add FuelFuel must meet these requirements High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls How to Start Your Pressure Washer OperationPressure Washer Location Clearances and Air MovementTo start engine thereafter How to Stop Your Pressure WasherTo start the engine for the very first time Follow these instructions to change ProjectPro nozzles How to Use Accessory TrayHow to Use ProjectPro Nozzle System To apply detergent, follow these steps Applying DetergentUsage Tips Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief For RinsingPressure Washer Maintenance MaintenanceMaintenance Schedule Nozzle Maintenance Ring MaintenanceCheck High Pressure Hose Check Detergent Siphoning TubeEngine Maintenance Oil Oil RecommendationsChecking Oil Level Adding Engine OilService Air Cleaner To service the air cleaner, follow these stepsService Spark Plug Spark Arrester ServiceKeep areas within heavy line clear of debris After Each UseAir Cooling System Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionWarranties Emissions Control System WarrantyOwner’s Warranty Responsibilities Claims and Coverage Exclusions MaintenanceEmission Information Limited Warranty Page 800 Product SpecificationsCommon Service Parts Manuel d’utilisation Où nous trouver Nettoyeur à pressionMoteur Date d’achatFonctions et commandes Opération Sécurité de l’opérateurAssemblage EntretienSymboles de danger et moyens Sécurité de l’opérateurDescription de l équipement Règles de sécuritéAvertissement Certains composants de ce produit ainsi que lesUnintentional peut résulter dans feu ou électrique Lorsque Vous Réglez OU Réparez Votre Nettoyeur À PressionAvis Fixation de la poignée et du plateau pour accessoires AssemblageDéballage du nettoyeur à pression Les articles dans la boîte incluentAjoutez de lhuile à moteur Ajoutez de lessence’essence satisfait les exigences suivantes Altitude élevéeListe de vérifications avant de démarrer le moteur Fournissez de leau à une cadence appropriéeFonctions et commandes Emplacement de la nettoyeur à pression OpérationMettre votre nettoyeur à pression en marche Dégagement de la nettoyeur à pressionPour démarrer le moteur pour la première fois Par la suite, pour démarrer le moteurComment utiliser le plateau pour accessoires Comment arrêter votre nettoyeur à pressionComment utiliser le système de buse ProjectPro Basse pressionApplication de détergent Un nettoyage en douceur des automobiles/camionsConseils dutilisation Pour appliquer des produits détergents, procédez comme suitPour rincer Rincer le nettoyeur à pressionTube de siphonnement du détergent Entretien du nettoyeur à pression EntretienCalendrier d’entretien Vérifiez le tuyau à haute pression Vérifiez le tube de siphonnement du détergentVérifiez le pistolet et la rallonge de gicleur réglable Entretien du gicleurEntretien du moteur Entretien du joint toriqueHuile Vérification du niveau dhuileVidange de lhuile moteur Entretien du filtre à airPour faire lentretien du filtre à air, procédez comme suit Entretien de la bougie dallumageEntreposez le nettoyeur dans un endroit propre et sec Après chaque utilisationSystème de refroidissement à air Entreposage pour lhiver Entreposage à long termeDépannage DeauResponsabilités de la garantie du propriétaire GarantiesGarantie du dispositif antipollution Durée de la couverture Aucun fraisRéclamations et exclusions de couverture EntretienGarantie Limitée Page Caractéristiques du produit Pièces d’entretien courant

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents