Briggs & Stratton Pressure Washer manual Broken bones, fractures, bruises, or sprains could result

Page 6

WARNING

Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

•NEVER pull starter cord without first relieving spray gun pressure.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•After each starting attempt, where engine fails to run, always point spray gun in safe direction, press red button and squeeze spray gun trigger to release high pressure.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•DO NOT allow CHILDREN to operate pressure washer.

•NEVER repair high pressure hose. Replace it.

•NEVER repair leaking connections with sealant of any kind. Replace o-ring or seal.

•NEVER connect high pressure hose to nozzle extension.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•ALWAYS point spray gun in safe direction, press red button and squeeze spray gun trigger, to release high pressure, every time you stop engine.

•NEVER aim spray gun at people, animals, or plants.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

6

BRIGGSandSTRATTON.COM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Engine Where to Find UsPressure Washer Date PurchasedTable of Contents Hazard Symbols and Meanings Operator SafetySafety Rules Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsBroken bones, fractures, bruises, or sprains could result Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassUnpack Pressure Washer AssemblyAttach Handle and Accessory Tray Items in the carton includeFuel must meet these requirements Add Engine OilAdd Fuel High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls Pressure Washer Location How to Start Your Pressure WasherOperation Clearances and Air MovementHow to Stop Your Pressure Washer To start the engine for the very first timeTo start engine thereafter How to Use Accessory Tray How to Use ProjectPro Nozzle SystemFollow these instructions to change ProjectPro nozzles Applying Detergent Usage TipsTo apply detergent, follow these steps Automatic Cool Down System Thermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing For RinsingMaintenance Maintenance SchedulePressure Washer Maintenance Check High Pressure Hose Nozzle MaintenanceRing Maintenance Check Detergent Siphoning TubeChecking Oil Level Engine MaintenanceOil Oil Recommendations Adding Engine OilService Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Spark Arrester ServiceAfter Each Use Air Cooling SystemKeep areas within heavy line clear of debris Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionEmissions Control System Warranty Owner’s Warranty ResponsibilitiesWarranties Maintenance Emission InformationClaims and Coverage Exclusions Limited Warranty Page Product Specifications Common Service Parts800 Manuel d’utilisation Moteur Où nous trouverNettoyeur à pression Date d’achatAssemblage Fonctions et commandes OpérationSécurité de l’opérateur EntretienDescription de l équipement Symboles de danger et moyensSécurité de l’opérateur Règles de sécuritéAvertissement Certains composants de ce produit ainsi que lesUnintentional peut résulter dans feu ou électrique Lorsque Vous Réglez OU Réparez Votre Nettoyeur À PressionAvis Déballage du nettoyeur à pression Fixation de la poignée et du plateau pour accessoiresAssemblage Les articles dans la boîte incluent’essence satisfait les exigences suivantes Ajoutez de lhuile à moteurAjoutez de lessence Altitude élevéeListe de vérifications avant de démarrer le moteur Fournissez de leau à une cadence appropriéeFonctions et commandes Mettre votre nettoyeur à pression en marche Emplacement de la nettoyeur à pressionOpération Dégagement de la nettoyeur à pressionPour démarrer le moteur pour la première fois Par la suite, pour démarrer le moteurComment utiliser le système de buse ProjectPro Comment utiliser le plateau pour accessoiresComment arrêter votre nettoyeur à pression Basse pressionConseils dutilisation Application de détergentUn nettoyage en douceur des automobiles/camions Pour appliquer des produits détergents, procédez comme suitRincer le nettoyeur à pression Tube de siphonnement du détergentPour rincer Entretien Calendrier d’entretienEntretien du nettoyeur à pression Vérifiez le pistolet et la rallonge de gicleur réglable Vérifiez le tuyau à haute pressionVérifiez le tube de siphonnement du détergent Entretien du gicleurHuile Entretien du moteurEntretien du joint torique Vérification du niveau dhuilePour faire lentretien du filtre à air, procédez comme suit Vidange de lhuile moteurEntretien du filtre à air Entretien de la bougie dallumageAprès chaque utilisation Système de refroidissement à airEntreposez le nettoyeur dans un endroit propre et sec Entreposage pour lhiver Entreposage à long termeDépannage DeauGaranties Garantie du dispositif antipollutionResponsabilités de la garantie du propriétaire Réclamations et exclusions de couverture Durée de la couvertureAucun frais EntretienGarantie Limitée Page Caractéristiques du produit Pièces d’entretien courant

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents