Bostitch CAP1645-OF Installation, Assembly, Grounding Instructions FIG, USE AN Adapter

Page 9

INSTALLATION

ASSEMBLY

INSTALLING HOSES

Risk of unsafe operation. Firmly grasp hose in hand when installing or disconnecting to prevent hose whip.

1.Ensure Regulated Pressure Gauge (D) reads 0 psi.

2.Grasp the hose at the quick connect plug and push the plug into the quick connect body (E). Coupler will snap into place.

3.Grasp the hose and pull to ensure coupler is seated.

DISCONNECTING HOSES

Risk of unsafe operation. Firmly grasp hose in hand when installing or disconnecting to prevent hose whip.

1.Ensure Regulated Pressure Gauge (D) reads 0 psi.

2.Pull coupler on quick connect body back to release Quick Connect plug on hose.

GROUNDING INSTRUCTIONS (FIG. 2)

Risk of Electrical Shock. In the event of a short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with an

appropriate grounding plug.

1.The cord set and plug (R) with this unit contains a grounding pin (S).

This plug MUST be used with a grounded outlet (T).

FIG. 2

R

T

S

IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.

2.Ensure the outlet being used has the same configuration as the grounded plug. DO NOT

USE AN ADAPTER.

3.Inspect the plug and cord before each use. Do not use if there are signs of damage.

4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

Risk of Electrical Shock. IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.

•Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.

•Repairs to the cord set or plug MUST be made by a qualified electrician.

EXTENSION CORDS

If an extension cord must be used, be sure it is:

•a 3-wire extension cord that has a 3-blade grounding plug, and a 3‑slot receptacle that will accept the plug on the product

•in good condition

•no longer than 50 feet (15.2 m)

•12 gauge (AWG) or larger. (Wire size increases as gauge number decreases. 10 AWG and 8 AWG may also be used. DO NOT USE 14 OR 16 AWG.)

Risk of property damage. The use of an undersized extension cord will cause voltage to drop resulting in power loss to the motor and overheating. Instead of using an extension cord, increase the working reach of the air hose by attaching another length of hose

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Guide Dutilisation Manual DE Instrucciones Definitions Safety Guidelines Important Safety IntroductionResult in property damage Risk of Explosion or FireRisk of Bursting Risk to Breathing AsphyxiationModifications or attempted repairs to the air tank Drain air tank daily or after each useTires Attachments & accessoriesRisk of Electrical Shock Risk from Flying ObjectsRisk of HOT Surfaces Risk from Moving PartsRisk of Unsafe Operation Specifications Features Save These Instructions for Future USEComponents FIG End of each use. See Draining Air Tank under Maintenance Assembly InstallationGrounding Instructions FIG USE AN AdapterCompatibility Location Voltage and Circuit ProtectionFrom the outlet Transporting FIGStop when tank pressure reaches cut‑out pressure PRE-START Checklist FIGPreparation for USE START-UP FIGMaintenance Chart MaintenanceProcedure Daily Weekly Checking Safety ValveService Information AccessoriesDraining AIR Tank FIG Checking AIR Filter ElementFull ONE Year Warranty GlossaryRepairs Problem Code Troubleshooting GuideTroubleshooting Codes Possible Cause Possible Solution Risk of bursting. Do not drill into, weldRefer to Motor Overload Protection under Features La mort ou des blessures graves IntroducciónRisque D’EXPLOSION OU D’INCENDIE CE QUI Peut SE Produire Comment L’ÉVITERCe qui peut se produire Risque D’ÉCLATEMENT Accessoires Risque DE Choc Électrique CE QUI Peut SE Produire Comment L’ÉVITERRisque Provenant DES Son utilisation Installer un extincteur dans la zone de travailFiche Technique Filtre d’admission d’air Poignées coulissantes ManocontacteurRégulateur Robinet de purge CaractéristiquesCette pression est contrôlée par le Régulateur F La terre Assemblage FIG’UTILISEZ PAS UN Adaptateur Provoquer UN Choc ÉlectriqueQuelle nexcède pas 50 pi 15,2 m EmplacementProtection DE LA Tension ET DU Circuit CompatibilitéDéplacementfig B Mode D’EMPLOILEVAGEFIG.3A Ranger le compresseur en position verticale ou horizontaleEntretien Procédures DE FonctionnementDémarrage FIG Arrêt FIGSe reporter Programme D’ENTRETIENProcédure Vérification DE LA Soupape DE SûretéVérification DES Éléments DU Filtre D’AIR FIG AccessoiresInformation SUR LES Réparations RéparationsGuide DE Dépannage GlossaireCodes DE Dépannage Cause Probable ProblèmeDéclenché Clapet obstruéAvec un centre de réparation en usine de La pression du réservoirDefiniciones Normas DE Seguridad Instrucciones Importantes DE SeguridadGuarde Estas Instrucciones Riesgo DE Explosión O Incendio ¿QUÉ Puede SUCEDER?Riesgo Respiratorio Asfixia ¿QUÉ Puede SUCEDER? Tanque de aire y ocasionar la explosión violenta del mismo Riesgo DE ExplosiónModificaciones o intento de reparación del tanque de aire Elementos y accesorios¿QUÉ Puede SUCEDER? Cómo Evitarlo Riesgo DE Descarga EléctricaRiesgo DE Objetos Despedidos ¿QUÉ Puede SUCEDER? Riesgo DE Superficies Calientes Cómo EvitarloMantenga el cabello, la ropa y los guantes Riesgo POR Piezas Móviles Cómo EvitarloRiesgo DE Operación Insegura ¿QUÉ Puede SUCEDER? Otras personasRiesgo POR Ruidos Riesgo DE Caídas Cómo EvitarloEspecificaciones ModeloLwA = 92,0 dBA re 1 pw Presión del sonido KpA = 3,0 dBA re 20μPAPotencia del sonido KwA = 3,0 dBA re 1 pw Componentes FIGVálvula DE Control Válvula DE SeguridadManómetro Medidor DE Presión DEL Tanque Manómetro Medidor DE Presión DE SalidaEnsamblaje InstalaciónPuede Provocar UNA Descarga Eléctrica Cables ProlongadoresCompatibilidad Voltaje Y Protección DEL CircuitoLugar EléctricasLevantar LA Unidad a Preparación Para EL USOTrasladar LA Unidad B Guarde el compresor en posición horizontal o verticalPuesta EN Marcha FIG MantenimientoApagado FIG Posición vertical es sólo para almacenamientoProcedimiento Tabla DE MantenimientoPara mayor información, llame al Controlar LA Válvula DE Seguridad FIGAccesorios Controlar EL Elemento DEL Filtro DE Aire FIGInformación DEL Servicio Técnico ReparacionesGarantía Completa DE UN AÑO ExcepcionesGUADALAJARA, JAL CULIACAN, SINMEXICO, D.F MERIDA, YUCCguía DE Detección DE Problema ProblemaGlosario Códigos DE Detección DE Problemas Pintura Piezas internas delInflamable Fusible quemado

CAP1645-OF specifications

The Bostitch CAP1645-OF is a robust and efficient air compressor designed for a variety of applications, including construction, woodworking, and home improvement projects. As a lightweight and portable unit, it packs a powerful punch while making it easy for users to transport and maneuver in different settings.

One of the standout features of the CAP1645-OF is its oil-free pump technology. This innovation eliminates the need for regular maintenance associated with oil-lubricated compressors, making it an ideal choice for DIY enthusiasts and professionals alike. This oil-free design not only reduces the upkeep but also allows for cleaner air output, making it suitable for indoor use without worrying about oil stains or residue.

The unit is equipped with a powerful 1.6 horsepower motor that delivers a maximum pressure of 145 PSI, providing a reliable source of air for various pneumatic tools. This high-pressure capability ensures that users can tackle a range of tasks, from inflating tires and powering nailers to running air tools efficiently. The CAP1645-OF features a 6-gallon pancake-style tank, which enhances stability during operation and allows for efficient air storage.

Moreover, the compressor boasts an impressive recovery time, ensuring that users do not have to wait long between tasks. The low noise level is another notable characteristic; the CAP1645-OF operates at around 78.5 dBA, making it one of the quieter options in its class. This feature is particularly beneficial in environments where noise reduction is necessary, such as residential neighborhoods.

The design of the compressor includes user-friendly controls, making it easy to adjust the pressure settings. The integrated handle and rubber feet enhance portability and stability, respectively. Additionally, the quick-connect air fitting allows for swift tool changes, ensuring that users can maximize productivity without the hassle of fumbling with connections.

Overall, the Bostitch CAP1645-OF stands out for its blend of performance, portability, and user-friendly features. With its oil-free technology, robust motor, and quiet operation, it represents a reliable choice for both professionals and DIY enthusiasts looking to accomplish their air-powered tasks effectively. Whether you are framing, roofing, or simply inflating, the CAP1645-OF is well-equipped to meet your needs.
Top Page Image Contents