3For RGV2800 and 6100 : Tighten the two bolts to fix the muffler bracket to the front cover, rear cover, and then the two bolts for the muffler to the muffler bracket.
M8 x 20 mm bolt and washer Ass’y . . . 4 pcs. (for RGV2800 and 6100)
Tightening torque
18.6 - 24.5
190 - 250
13.7 - 18.0
(1)For RGV2600 and RGV4100 only :
Attach the fuel strainer to the bottom of the fuel tank. Screw in the fuel strainer all the way and return one to two turns, and then lock it with the lock nut.
For RGV6000 only :
Attach the fuel strainer to the frame.
Tightening torque
4.9 - 6.9 N-m
50 - 70
3.6- 5.0
(2)Mount the fuel tank on the frame with rubber washers between the tank flange and the frame.
M6 x 20 mm bolt (black) . . . 4 pcs.
Rubber washer . . . 4 pcs.
NOTE : For easy tank assembly, glue the rubber washers over the mounting holes of the frame.
(3) Connect the rubber pipe.
First, fit the hose clamps on the rubber pipe and connect it to the strainer and the carburetor. Then fasten it with the hose clamps.
For RGV6100, connect the rubber pipe to the strainer and the fuel tank in the same way.
NOTE : Apply a drop of oil to the rubber pipe for easier connection.
Fig.
- 50 -