Servis-Rhino RC-12 manual SGM-10

OPERATION

OPERATION

All Safety Shields, Guards and Safety devices including (but not limited to) -

the Deflectors, Steel Guards, Gearbox Shields, PTO integral shields , and Retractable Door Shields should be used and maintained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact. (SFL-5)

Replace bent or broken blade with new blades. NEVER ATTEMPT TO STRAIGHTEN OR WELD ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.

(SGM-10)

The operator’s manual and decals affixed on the unit contain important instructions on the safe and proper use of the equipment. Maintain these important safety features on the implement in good condition to ensure the information is available to the operator at all times.

•Ensure the manual canister is secured to the equipment with the operator’s manual inside.

•Ensure all decals are in place and legible. Replace missing, damaged, and unlegible decals. OPS-U- 0011

•Check that the main driveline securely attached to the tractor and the locking collar is seated in the groove of the PTO Shaft.

•Inspect that the 3-point hitch pins are the proper size, correctly installed and secured to the tractor lift arms with retaining pins inserted.

•Ensure that a properly rated safety tow chain is equipped securing the mower to the tractor. OPS-F-0015

RC12 12/05 Operation Section 4-16

© 2005 Alamo Group Inc.