6.Insert the feed module by aligning the pins and pushing it toward the left to fit it into position. Be sure the gears are aligned and it snaps into place.
7.Reinstall the feed module cover by aligning the tabs in the slots and pushing the feed module cover down until it snaps into place.
Replacing the tires on The i1200/i1300 Series Scanners use high quality tires that were
the feed module engineered to provide the ultimate in feeding reliability across the broadest range of document types, sizes and thicknesses. When the scanner is used in a normal office operating environment, the transport and tires are cleaned using approved cleaning solutions on a regular basis and the documents scanned are high quality 20 lb. bond office paper, the tires can last up to 200,000 scans on the separation module and 500,000 scans on the feed module. More difficult paper types, challenging operating environments, less frequent cleaning or cleaning the tires with alcohol or other strong solvents will cause reduced tire life. Paper types such as carbon paper and newsprint are particularly difficult and consistently making these documents a significant portion of your workload will certainly shorten tire life. When you notice degradation of feeder performance, multiple feeds, stoppages, etc., that are not resolved by following the cleaning procedures described in this chapter, you will need to change the tires.
NOTE: Tire life and performance will vary based on your unique document set.
1.Remove the feed module cover and feed module as outlined in the previous section.
2.Remove one core assembly by lifting up and out of position.
| 97 |