Kodak i1200 manual

Page 103

Vacuuming the scanner Before cleaning the imaging area, it is suggested that you vacuum the inside of the scanner to remove any dust and debris.

Cleaning the imaging 1. Remove dust and debris from this area by using a Staticide wipe or

areaa small brush. Be careful not to scratch the imaging area when cleaning.

IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for more information.

2.Wipe the upper and lower imaging area again with an almost-dry Staticide wipe to remove any streaks.

3.When finished, close the scanner cover.

A-61560 June 2006

99

Image 103

Contents I1200/i1300 Series Scanners Contents Image Processing Troubleshooting Introduction Scanner features User precautions Safety informationAgency approvals Safety and regulatoryEuropean Union Netzanschluß Power system Acoustic emission EMC statementsPower system connection United StatesJapan KoreaWhat’s in the box Getting StartedInstalling the Kodak Driver Software Installing the scannerSelect Install Scanner Software Page Page Page Cable Connecting the USBUSB cable supplied with your scanner has two different ends Page Installing application software Front view Scanner componentsInside view Back view Locking the scannerTurning the scanner on and off Scanner positions Using the ScannerDegree angle Tilting the scanner body Adjusting the output tray Adjusting the input tray Adjusting the side guides Start and stop scanning Maximum Document Size Document preparationVerifying your scanner installation Window display icons Viewing test images Understanding your scanning environmentSmart touch functionality Page Scan To settings Page Scan As settings Numbers Configuring functionPage Page June Page Scanning your documents Manual feeding Automatic feedingOverview Image ProcessingScan Validation Tool dialog box Page Page Page Page Main Kodak Scanner window Page Preview window Image Settings windowFollowing is a description of the toolbar icons Toolbar iconsGeneral tab Image Size tabPost-scan rotation options BorderSelection of Black and White Filters Noise Filters Image Page Enhancements tab Page Advanced options Icons Content Settings tab Page Setting up automatic color detection Example Page Page Using different settings for each side of a document Example Images for each side of a document dual-stream Example Check the Different settings per side checkboxDocument Feeder Device Settings windowMultifeed tab Page Tests General diagnostics tabScanner Time Debug tab Images Sent To application Logs tabUsing the Isis Driver Main Isis Driver window Main tab Image ModeMain tab provides the following options Page Brightness Layout tab provides these options Layout tabImage Orientation Options Black on White White on Black Scanner tab provides the following options Scanner tabMulti-feed Detection options Page Page Adjustments tab provides the following options Adjustments tabColor Adjustment Page Dropout tab About tab Log tabPage Inches or Centimeters AreaOpening the scanner cover MaintenanceTransport Cleaning the rollersCleaning or replacing the separation module Rotate the feed rollers to clean the entire surfacePage Page Page Page Page Page Replace each tire by sliding the tire off the core Page Contact your scanner supplier to order supplies AccessoriesIndicator lights and error codes TroubleshootingClearing a document jam Problem Possible Solution Problem solvingError Message Description Error code listing105 Scanner Type/Speed Appendix a SpecificationsCropping Features Appendix B Feature Map108 June Limited warranty for Kodak Scanners Appendix C Warranty US and Canada only110 111 Warranty Service descriptions Return procedure Customer responsibilityAUR On-site serviceDepot service Important restrictions Contacting Kodak