Kodak i1200 manual Multifeed tab

Multifeed tab	Multifeed detection aids in document processing by detecting
	documents that may go through the feeder overlapped.

Sensitivity — controls how aggressively the scanner will work to determine if more than one document is fed into the transport. Multi- feeds are triggered by detecting air gaps between documents. This allows multi-feed detection to be used with job sets containing documents with mixed thicknesses. You may set the Multi-Feed Detection to High, Medium or Low sensitivity. If you select None, no multifeed detection will occur.

•Low: least aggressive setting and is less likely to detect labels, poor quality, thick or wrinkled documents as multi-fed documents.

•Medium: use Medium sensitivity if your application has varying document thickness or labels attached to the document. Depending on the label material, most documents with labels should not be detected as a multi-fed document.

•High: most aggressive setting. This is a good setting to use if all documents are similar in thickness to 20-lb. Bond paper.

Length Detection — choose the minimum length of the document that can be scanned with a multi-feed being detected. A value of 0 indicates no length detection. Length detection can be used when scanning same-size documents. The maximum value is 33.5 inches.

68 A-61560 June 2006