Scan Area dialog box The Scan Area dialog box allows you to define the amount of image data which is returned to the host. The area can be defined in Pixels, Inches or Centimeters.
The Scan Area dialog box is only available when Fixed to Transport or Relative to Document is selected on the Scanner Settings dialog box.
Page Size the default paper size is set when a scanner is first selected. You can choose a different paper size using the
NOTE: Page Size and Page Layout selections also appear on the Layout tab. If you make a change on the Scan Area dialog box, the same selections appear on the Layout tab and vice versa.
The Page Layout area allows you to select either Portrait or Landscape.
•Portrait will display the image orientation in the shape of a conventional portrait, where height is greater than width.
•Landscape will display the image orientation in the shape of a conventional landscape painting, where width is greater than height.
•Snap causes the dimensions of the Area box to be controlled in fixed
Area
•X: the distance from the left end of the scanner to the
•Y: the position from the top end of the document to the top end of the scanning area.
•Width: the width of the scanning area.
•Height: the height of the scanning area.
Units — select whether you want the area to be defined in Pixels,
Inches or Centimeters.
| 89 |