Verifying your scanner installation
Kodak provides a test application called the Kodak Scan Validation Tool. This section describes how to use this tool to perform a basic scan function which includes feeding paper and viewing captured images on your PC.
The following steps help you to verify that your scanner installation was successful. If this procedure is successful, you will be ready to use your scanner. If it is not successful, go back and review the installation procedures outlined in the section entitled, “Installing the scanner” in Chapter 2.
Before you begin, be sure the scanner is on and ready to scan.
1.Select Start>Programs>Kodak>Document Imaging>Scan Validation Tool.
The Scan Validation Tool dialog box will be displayed.
2.Select TWAIN for the Driver Types and Kodak Scanner i12XX/ i13XX as the Driver. The Scan Validation Tool dialog box will be displayed.
3.Click the Scanner icon.
24 |