Document preparation
•A batch of documents to be fed into the scanner must be arranged so the leading edges of all documents are aligned and centered in the input tray; this allows the feeder to introduce documents into the scanner one at a time.
•Staples and paper clips on documents may damage the scanner and documents. Damage resulting from scanning documents with staples, paper clips or other metallic objects are not covered by warranty. Remove all staples and paper clips before scanning.
•Documents should be in good condition.
Paper Types: Bond, Laser, Inkjet, Offset
NOTE: Chemically coated papers may cause excessive wear/swelling of the rollers.
Paper inks: All inks on the paper must be dry before scanning is
started. This includes: Standard offset printing, Inkjet printer, Thermal transfer, Handwriting inks.
Correction Fluids: Liquid Paper®,
Paper Weights: 34 g/m2 to 413 g/m2 (9 to 110 lbs.)
Maximum Document Size:
•Automatic Document Feeder — 215 x 863 mm (8.5 x 34 in.)
•Flatbed — 215 x 297 mm (8.5 x 11.69 in.)
Minimum Document Size: 63.5 x 50 mm (2.5 x 2 in.)
23 |