Blank image detection — select the image size (KB), below which an image is determined to be blank. Images with sizes less than the number you select will not be created. If you use this option, you must specify a blank image size for each image type (Binary, Gray and Color) you want to delete. If you do not make an entry in these fields, all images are kept.
Multi-feed Detection options
Length Detection this option can be enabled or disabled. The default is disabled. If enabled, select the maximum length of the document that can be scanned without a
•Auto Set: automatically sets the maximum length value
Ultrasonic Detection — check this option to set
Sensitivity — controls how aggressively the scanner will work to determine if more than one document is fed into the transport. Multi- feeds are triggered by detecting air gaps between documents. This allows
•Low: the least aggressive setting and is less likely to detect labels, poor quality, thick or wrinkled documents as
•Medium: use Medium sensitivity if your application has varying document thickness or labels attached to the document. Depending on the label material, most documents with labels should not be detected as a
•High: the most aggressive setting. This is a good setting to use if all documents are similar in thickness to
Action — select an option of how you want to the scanner to perform if it detects a
•Beep and continue: if selected, the scanner will beep, display and log the condition but continue to operate.
•End of Job: if selected, the scanner log the condition and stop the feeder and transport (the scanner will be disabled).
Alarm - select this option if you want the scanner to make a sound when a
Calibrate — the Kodak i1200/i1300 Scanners automatically calibrate. This option is available if a Kodak representative directs you to calibrate the scanner using this option.
| 81 |