KODAK 1200i
b)Color Cal Horizontal. Select Utility Menu – Calibration Menu – Color Calib Menu - Horiz. Calib Test. Choose best group
of aligned bars for each set of colors. Perform whenever a cartridge is removed.
c)Color Cal Vertical. Select Utility Menu
– Calibration Menu – Color Calib
Menu - Vert. Calib Test. Choose best group of aligned bars for each set of colors. Perform whenever a cartridge is removed or if the feed adjust value is adjusted.
E.Activate the Internal Test Print. Select Utility Menu – Service Menu – Test Print. This will help verify the printer
calibrations are correct. Inspect the vertical and horizontal alignment between all colors in the upper two sections of the test print. If vertical or horizontal alignment is not achieved then repeat step D.
Step 12: Best Quality Mode
To obtain the highest or optimum print quality mode from the printer place the print pass mode to 16. To set the
Print Pass Modes: 2, 3, 4, 6, 8, 10, 12, 16
High speed print modes shown in BLACK
Default print mode shown in RED
Quality print modes shown in BLUE
Technical Training Guide | 17 |