KODAK 1200i WIDE-FORMAT PRINTING SYSTEM
cable connection (at data board or main board) is incorrectly seated or the reservoir data board may be damaged thus requiring field replacement.
NOTE: only authorized service providers should attempt to perform steps 2., 3., 4., or 5. Contact technical support for assistance.
2.Check all plugs/connections; swap two intermediate reservoir plug connectors to check wiring harness connectivity.
3.Swap the suspect reservoir data board with either the black or cyan reservoir data boards to verify functionality. Replace data board with a new one.
NOTE: only replace the reservoir data board (see picture) prior to replacing any other assembly.
4.Replace ink reservoir wiring harness if a wiring harness plug is suspected as defective.
5.Check main board by replacing with spare.
Technical Training Guide | 52 |