KODAK 1200i
4. Media Handling System
-Four media supply modes are available: Sheet, Roll, Roll 2 and TakeUp
-Media rolls can be easily exchanged with the removable media spindles
-The Autoload paper sensor has a 6 second delay when media is manually loaded at rear of printer
-The Roll 2 mode allows for a second roll of media to be loaded onto the lower roller (no takeup mode available)
-The lower roller, new heavy duty stepper motor,
and new pinch roller design help better control feed, paper travel and line length accuracy.
5. Print Speeds:
60 inch printer
High Speed Mode (2 pass): 220 sfph (20.4 smph)
Productivity Mode (3 pass): 150 sfph (14 smph)
Fine Mode (4 pass): 115 sfph (10.7 smph)
Enhanced Mode (6 pass): 75 sfph (7.0 smph)
42 inch printer
High Speed Mode (2 pass): 195 sfph (18.1 smph)
Productivity Mode (3 pass): 140 sfph (13.0 smph)
Fine Mode (4 pass): 104 sfph (9.6 smph)
Enhanced Mode (6 pass): 70 sfph (6.5 smph)
High Quality (16 pass): 23 sfph (2.5 smph)
Note: printer ships with 64 MB SDRAM and is not up gradable; 32 MB RAM on Main PWA; HP- GL/2 (vector file formats) is not supported
6. Power Supply:
Input Operating Range
90 – 132 and 180 – 264 VAC
Input Operating Frequency Range
43 – 67 Hz
Power Consumption
Typical: 1035 W; Idle: 20 W; Maximum: 1225 W
Output Voltage
24VDC
Output Current
8.3 Amp. Maximum
Technical Training Guide | 8 |