Page 7
About yourprinter
Thank you for choosing this printer!
We've worked hard to make sure it will meet your needs.
To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.
We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the reason we do what we do, and your suggestions help us do it better.
Minimizing your printer's environmental impact
We are committed to protecting the environment and are continually improving our printers to reduce their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's environmental impact even further.
Conserving energy
•Activate Eco-Mode.This feature sets the screen brightness to low and sets the printer to change to Sleep mode after the printer is left idle for 10 minutes.
•Select the lowest Sleep timeout. The Sleep feature puts the printer in a minimum‑power standby mode after the printer has been idle for a set amount of time (the Sleep timeout).
•Share your printer. Wireless/network printers allow you to share a single printer among multiple computers, thus conserving energy and other resources.
Conserving paper
•Print more than one page image on one side of the paper. The Pages per Sheet feature allows you to print multiple pages on one sheet. You can print up to 16 page images on one side of a sheet of paper.
•Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or automatically (depending on your printer model).
•Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print Preview dialog, or the printer display (depending on your printer model).
•Use recycled paper.
•Reduce the margins of documents to be printed.
•Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save them to a computer program, application, or flash drive for presentation.
Contents
October
S410 Series Users Guide
Contents
Copying
Printing
Scanning
Networking
Troubleshooting
Mailing
Faxing
Index 176
Safety information
Conserving energy
About your printer
Thank you for choosing this printer
Minimizing your printers environmental impact
Publications
Finding information about the printer
Conserving ink
Recycling
Go to http//smartsolutions.lexmark.com. Click Help to
Use
Understanding the parts of the printer
About your printer
About your printer
Ordering ink cartridges
Ordering and replacing supplies
Return Program cartridge Regular cartridge
Replacing ink cartridges
Using genuine Lexmark ink cartridges
Removing ink cartridges
Ordering paper and other supplies
Installing ink cartridges
Part Number
Paper Paper size
Recycling Lexmark products
Replacing the language sheet
Using the printer control panel buttons and menus
Using the printer control panel
Use Keypad Copy mode or Photo mode
Using the printer control panel buttons and menus
Saving paper and energy
Changing the Sleep timeout
Setup OK Device Setup OK Sleep OK
Setup OK Print Mode Setup OK 2‑Sided Copy, Standalone OK
Setup OK Device Setup OK Screen Brightness OK
Restoring factory default settings
Setup OK Restore Factory Defaults OK
Minimum system requirements
Using the printer software
Using the Windows printer software
Software installed during printer installation
Printer software
Launching an application
Using the Macintosh printer software
Use Printer Settings Customize settings for fax jobs
Launching the Print dialog
For Macintosh users
Finding and installing optional software
Accessing Web links
For Windows users
Downloading PCL and PS drivers Windows only
Reinstalling the printer software
Uninstalling the printer software
Updating the printer software
Using the Internet
Installing the printer software
Loading paper
Loading paper and original documents
Load up to Make sure that
Paper and specialty media guidelines
Loading paper and original documents
Saving paper settings
Loading original documents into the ADF
Loading original documents on the scanner glass
Printing basic documents
Click Properties, Preferences, Options, or Setup
Printing
Tips for printing
Changing the print order of pages
Collating printed copies
Printing multiple pages on one sheet
Printing envelopes
Printing on specialty media
Paper/Finishing tab Manage Custom Sizes New
Printing on labels
Printing on custom‑size paper
Working with photos
Supported file types
Printing photos from a flash drive
Using a flash drive with the printer
Printing photos from a PictBridge-enabled digital camera
Printing on both sides of the paper duplexing automatically
Printing on both sides of the paper duplexing
Setup OK Print Mode Setup OK Page Dry Time OK
Setting the duplex printing dry time
Using the control panel
Using the printer software
System Preferences Print & Fax select your printer
Managing print jobs
Finding the print queue for your printer
For Macintosh users
Creating a print queue
Setting your printer as the default printer
For Windows users
Pausing print jobs
Changing the default printing mode
Resuming print jobs
Canceling print jobs
Printing from a mobile device
What is LexPrint?
Supported printers
Scanner glass
Copying
Tips for copying
Making copies
Copy OK Scale
Adjusting copy quality
Copying an ID card
Enlarging or reducing images
Copy OK Darkness
Collating copies using the printer control panel
Making a copy lighter or darker
Placing separator sheets between copies
Placing an overlay message on each
Copying multiple pages on one sheet
Removing the background of a copy
Copy OK 2‑Sided Copies
Making a two-sided duplex copy
Making a two‑sided duplex copy automatically
Making a two‑sided duplex copy manually
Canceling copy jobs
Scan OK Computer USB‑Connected Computer OK
Scanning
Tips for scanning
Scanning to a local computer
Scanning to a flash drive or memory card
Scanning to a network computer
Scanning documents for editing
Scanning photos for editing
Scanning directly to e‑mail using the printer software
For Macintosh users
How can I improve the quality of a scan?
Scanning FAQ
Canceling scan jobs
Why am I being asked for a PIN?
Double‑click Printer Settings
Setting up the printer to e-mail
Setting up the e-mail function
Creating an e‑mail contact list using the computer
Tips for e‑mailing
Sending e-mail
Contacts tab Individuals tab
Canceling an e‑mail
Scenario 1 Standard telephone line
Setting up the printer to fax
Setup 1 Printer is connected to a dedicated fax line
Faxing
Connected to different wall jacks
Connected to the same telephone wall jack
To connect
Scenario 2 Digital Subscriber Line DSL
Tips for this setup
Scenario 3 VoIP telephone service
To connect
Setup 1 Printer is connected directly to a cable modem
Scenario 5 Country‑ or region‑specific setup
Connecting the printer to a non‑RJ‑11 wall jack
EXT Line
Connecting the printer to a wall jack in Germany
Setup OK Fax Setup OK Dialing and Sending OK Fax Name OK
Setting the fax header
Entering your user information
Setting the date and time
Configuring the fax settings
Configuring fax settings using the printer control panel
Setting the fax footer
Using the Fax Setup Wizard in Windows
Configuring fax settings using the fax software
From here You can
Setup OK Fax Setup OK Address Book OK
Creating a contact list using the printer control panel
Using the Printer Settings in Macintosh
Double-clickPrinter Settings
Click Printer Home Fax Edit contact list
Creating a contact list using the fax software
Click Select from phonebook
Sending faxes
Sending faxes using the printer control panel
Tips for sending faxes
Tips for receiving faxes
Receiving faxes
Receiving faxes manually
Receiving faxes automatically
Tips
What is a splitter and what type of splitter should I use?
Faxing FAQ
What is my fax number?
How do I set the distinctive ring for the printer?
What is my dialing prefix?
When do I need to set Auto Answer to On?
How many rings should I set?
How can I check the dial tone?
How do I adjust the speaker volume on the printer?
Adjusting the dialing volume
Adjusting the ringer volume
How do I send a fax at a scheduled time?
What settings work best with voice mail service?
How do I change the resolution of the documents that I fax?
Quality Black resolution Color resolution
How do I print a fax on both sides of the paper?
How do I send a fax using a phone calling card?
How do I know that the fax was sent successfully?
How do I view the fax history of the printer?
Can I retrieve failed faxes?
Setup OK Fax Setup OK Fax Blocking OK Turn On/Off OK On OK
How do I forward a fax?
Can I block faxes?
Supported network security options
Installing the printer on a wireless network
Wireless network compatibility
Networking
Setup OK Network Setup OK Print Network Setup Page OK
Printing a network setup
No Security
Information you will need during advanced wireless setup
Authentication type Encryption method Open Mode None
Installing the printer on a wireless network
Installing the printer on other computers
Adding the printer to your wireless network
Special wireless installation instructions
Before you begin
Assigning a static IP address
Changing wireless settings after installation
Click Configuration TCP/IP Set static IP address
Double‑click Wireless Setup Assistant
Creating an ad hoc wireless network
Advanced wireless setup
Windows Vista or later
Windows XP
Select View Available Wireless Networks
Adding a printer to an existing ad hoc wireless network
USE the Personal Identification Number PIN Method
Configuring the printer wirelessly using WPS Windows only
Configuring Wi‑Fi Protected Setup manually
USE the Push Button Configuration PBC Method
Using the printer locally USB
Using the printer wirelessly
If the printer is currently set up for Ethernet
Selecting the printer
Using the printer over an Ethernet network
If the printer is currently set up for wireless
Select Set as Default Printer from the menu
Double‑click Lexmark Extras Lexmark Setup Assistant
Mac OS X version 10.5 or later
Double‑click Printer Setup Utility or Print Center
Sharing a printer in a Windows environment
Adding the printer
Click Sharing or Printer Properties
Sharing a printer in a Macintosh environment
WPA Personal, WPA2‑Personal or WPA2‑Enterprise
Configuring security
EAP‑MD5, MSCHAPv2, or Leap
If you have selected Do this
Networking FAQ
Configuring 802.1X Authentication
What is Wi‑Fi Protected Setup?
What is an SSID?
Where do I find my WEP key or WPA/WPA2 passphrase?
Where do I find my SSID?
How are home networks configured?
What is a network?
Characters Security type
Scenario 2 Wireless network with Internet access
Wireless network examples
How do I attach the USB cable?
What is a USB cable?
Why do I need a USB cable?
Scenario 3 Wireless network with no Internet access
How are infrastructure and ad hoc networks different?
Infrastructure Ad hoc
Finding the signal strength
Checking computer connectivity
Checking printer connectivity
Arrange the Network to Reduce Signal Absorption
How can I improve wireless signal strength?
Move the Printer Closer to the Access Point
Remove Obstacles Between the Access Point and the Printer
For Macintosh users with an AirPort base station
For Macintosh users with an access point
What is a MAC address?
Click Advanced or Configure
How do I find the MAC address?
What is an IP address?
Locating the printer IP address
What is TCP/IP?
How do I locate IP addresses?
How are IP addresses assigned?
What is the difference between Guided and Advanced setup?
What is a key index?
Checking ink levels
Using the printer control panel
Maintaining the printer
Maintaining ink cartridges
Cleaning the printhead nozzles
Cleaning the exterior of the printer
Setup OK Maintenance OK
Moving the printer to another location
Cleaning the scanner glass
Page
Before you troubleshoot
Troubleshooting
If Troubleshooting does not solve your problem
Setup troubleshooting
Make Sure the INK Cartridges are Inserted Correctly
Software did not install
Reconnect the Printer Power Supply
Print job does not print or is missing pages
Remove and Reinstall the Printer Software
Printer is printing blank pages
Make Sure the Printer is not in Sleep Mode
Printer is busy or does not respond
Cannot delete documents from the print queue
Make Sure the USB Port is Enabled in Windows
Cannot print through USB
Change to Size Paper
Alignment Problem
Understanding printer messages
Cannot Collate Job
Ink Cartridge Missing
Ink Cartridge Error
Close Printer
Fax Memory Full
Ink Low
Memory Device Error
Network x Software Error
Ink Cartridge Unsupported
Remove and reinsert the printhead
Printhead Error
Printer Memory Full
Printhead Cannot Move
Printhead Missing
Printhead Unsupported
Replace Ink Cartridge
Printhead Warning
Jams and misfeeds troubleshooting
Check the jam clearance area
Paper jam in the printer
Paper jam in the exit tray
Paper jam in the paper support
Paper jam in the duplex unit
Check the ADF
Paper jam in the ADF select models only
Scenario
Scenario
Check under the ADF tray
Paper or specialty media misfeeds
Check Paper Condition
Poor quality at the edges
Print troubleshooting
Check Minimum Print Settings
Select the Borderless Print Feature
Print speed is slow
Streaks or lines on printed image
Check the INK Levels
Computer slows down when printing
Copy and scan troubleshooting
Copier or scanner does not respond
Scan was not successful
Scanner unit does not close
Poor copy or scanned image quality
Partial copies or scans of documents or photos
Restart the Computer
Fax troubleshooting
Scanning takes too long or freezes the computer
Cannot scan to a computer over a network
Decrease the Transmission Speed of the FAX Modem
Fax troubleshooting checklist
Connection checklist
Cannot send faxes
Setup OK Fax Setup OK Dialing and Sending OK Dial Prefix OK
Enable Error Correction
Enable Automatic FAX Conversion
Make Sure That the Dial Prefix Setting is Correct
Cannot run the fax software
Error Message What it indicates Possible solutions
Fax error messages on the printer control panel
Make Sure the Printer is Connected to a Telephone Line
Troubleshooting 150
Make Sure the USB Port on the Computer is Working
Network troubleshooting
Continue button is unavailable
Make Sure the Printer is Plugged in and Turned on
Cannot print and there is a firewall on the computer
RUN the Installer Again
Page
Setup OK Demo Mode OK Off OK
Cannot print over wireless network
Troubleshooting 155
For Macintosh users with an access point
Wireless print server not installed
Locating the printer IP address
Resolving intermittent wireless communications issues
Troubleshooting 160
Troubleshooting 161
Edition notice
Product information
Lexmark International, Inc All rights reserved
Trademarks
United States Government Rights
Meter average sound pressure, dBA
Modular component notice
Licensing notices
Noise emission levels
Product disposal
Battery notice Static sensitivity notice
Sleep Mode
Temperature information
Power consumption
Product power consumption
European Community EC directives conformity
Off mode
Industry Canada compliance statement
Avis de conformité aux normes de l’industrie du Canada
168
169
Verwendung dieses Produkts in der Schweiz
Using this product in Switzerland
South Africa telecommunications notice
Utilisation de ce produit en Suisse
Industry Canada Canada
Regulatory notices for wireless products
Exposure to radio frequency radiation
Industry Canada Canada
172
173
Lexmark International, Inc., Lexington, KY
Statement of Limited Warranty
Limited warranty
Limited warranty service
Limitation of liability
Extent of limited warranty
Additional rights
Numerics
Index
EAP‑TLS
Page
Page
Page
Ssid
VPN