Philips RFX9400 manual Installing the Extender, Configuring the Extender through a Router

Page 9

RFX9400 Starter’s Guide

Configuring the Extender through a Router

When the Extender is already installed and connected to external AV-equipment, it is possible to configure it through a router.

1Connect the Extender to the router, and the router to the PC, as indicated below.

Straight

Ethernet cable

Extender

Router

2Set the Extender’s Configuration switch to 3.

3Open the ProntoEdit Professional on the PC.

4In the Tools menu, select Extender Discovery.

The Extender Discovery tool appears, with a list of all the detected Extenders in the Pronto Network.

5Select the Extender that you want to configure and click on the Configure button. The Configuration Tool opens in the browser.

6Finalize the configuration, as described in the instructions on page 5.

ENGLISH

Installing the Extender

Warning Keep the Extender away from heat sources such as amplifiers.

Before connecting the Extender to external AV-equipment, make sure that the antenna is placed correctly.

Place the antenna in an upright position.

Connecting the Extender to AV-equipment

To connect the Extender to AV-equipment, use one of the following cables enclosed with the Extender:

• a Dual IR emitter;

Insert the mini-jack connector of the Dual IR emitter in the IR output of the Extender.

Attach the emitter to the infrared receiver of the AV- component.

6

Image 9

Contents Manual de inicio Page Starter’s Guide Contents Network Mode Stand-alone ModeBefore You Start Stand-alone AdvantagesUnpacking the Extender Pronto Wireless ExtenderUse the default switch settings of the Extender Configuring the ExtenderWireless connection Stand-alone ConnectionExtender will restart. After startup Configuration cable this is the crossedConfiguring the Extender through a Router Installing the ExtenderConnecting the Extender to AV-equipment Set the Extender’s Configuration switch toTroubleshooting SupportWhat Do the LEDs Indicate? AV-components do not respond to commands from the Extender Extender cannot communicate with the wireless networkFinding the Exact Location of an AV-component’s IR Receiver Operating AV-components with the ExtenderResetting the Extender Firmware UpdateBusy LED blinks green when the Control Panel is not in use Updating the Extender with the configuration cableSpecifications Pronto Wireless Extender Starter’s GuideRemarks Contenido del paquete del Extensor ContenidoModo Stand-alone modo autónomo Antes de empezarModo Network modo red Ventajas del modo Stand-aloneContenido del paquete del Extensor Conexión Stand-alone Configuración del ExtensorConexión Network Conexión inalámbricaMacro desde el Control Panel Instalación del Extensor Configuración del Extensor a través de un routerConexión del Extensor a un equipo AV Abra ProntoEdit Professional en el PCDetección de errores Asistencia¿Qué indican los indicadores LED? El indicador LED WiFi parpadea en rojo El indicador LED WiFi está iluminado en rojoFuncionamiento de los componentes AV con el Extensor Hay ID del Extensor duplicadosActualización de Firmware Actualización del Extensor con el cable de configuraciónReinicialización del Extensor Actualización del Extensor a través de un routerPronto Wireless Extender Manual de inicio EspecificacionesObservaciones Table des matières RFX9400FX9400 Guide deGuidedémarragede démarrageMode Network réseau Mode Stand-alone autonomeAvantages du mode Stand-alone autonome Avantages du mode Network réseauDéballage du Prolongateur Connexion Stand-alone autonome Configuration du ProlongateurConnexion Network réseau Connexion filaireControl Panel Branchez l’adaptateur secteur du ProlongateurConfiguration du Prolongateur par un routeur Installation du ProlongateurPlacez le commutateur de configuration du Prolongateur sur Connexion du Prolongateur à l’équipement audio/vidéoQu’indiquent les voyants ? DépannageAjustement du niveau de puissance des sorties IR Il existe un conflit IPLe voyant WiFi est rouge Le voyant WiFi est rouge et clignoteIl existe des ID de Prolongateur dupliqués Configuration du Prolongateur par un routeur Mise à jour du micrologicielRéinitialisation du Prolongateur Guide de démarrage du Pronto Wireless Extender SpécificationsRemarques FCC Compliancy IFU Approbation / Safety Content RFX9400Declaration Regulations According to R&TTEMarking Declaration of ConformityDoCDeclaration of Conformity of this product can be found at IiiGerman Entsorgung Ihres alten Geräts French Mise au rebut des produits en fin de vieItalian Smaltimento di vecchi prodotti Norwegian Avhending av gamle produkterEliminação do seu antigo produto Polish Usuwanie zużytych produktówSlovak Likvidácia tohto produktu Slovenian Odlaganje starega izdelka3104 205