Global user (IP network port)
®
The ServSwitch CX with IP models |
| LOCAL | REMOTE |
| USER | USER | |
provide an autosensing Ethernet |
| ||
|
|
| |
IP port that can operate at 10 or |
|
| CX R |
|
|
| |
100Mbps, according to the network | POWER |
| |
speed. The ServSwitch CX with IP | IN |
| |
|
| ||
|
|
| |
models are designed to reside quite |
| SAM |
|
easily at any part of your network: |
| SERVER | |
|
| ||
• They can be placed within | SYSTEM |
| |
the local network, behind any |
|
firewall/router connections to the Internet, or |
|
GLOBAL
USER
IP
MODEM
/ISDN
POWER
SWITCH
To connect the Global user (IP network) port
1Depending upon where in the network the ServSwitch CX with IP is being connected, run a category 5, 5e or 6 link cable from the appropriate hub or router to the ServSwitch CX with IP unit.
2Connect the plug of the link cable into the IP port on the front panel of the ServSwitch CX with IP unit.
•They can be placed externally to the local network, on a separate sub- network or with an open Internet connection.
Wherever in the network a ServSwitch CX with IP is situated, you will need to determine certain configuration issues such as address allocation and/or firewall adjustment to allow correct operation. Please refer to Networking issues within the Configuration chapter for more details.
IMPORTANT: When a ServSwitch CX with IP is accessible from the public Internet or dial up connection, you must ensure that sufficient security measures are employed.
IP network link
3Configure the network settings as appropriate to the position of the ServSwitch CX with IP within the network - see Networking issues for details.
11