Black Box ServSwitch CX, KV1424A-R2 manual Clearing IP access control, What is IP access control?

Clearing IP access control

This option removes all entries from the IP access control feature within the ServSwitch CX with IP.

What is IP access control?

The IP access control feature (configurable by a remote admin user) allows certain network address ranges to be denied access to the ServSwitch CX with IP. If set incorrectly, it is possible to exclude all network users and so this option provides an emergency recovery point.

®



To clear IP access control

1From a local or remote (not accessible from a global keyboard), log on as the ‘admin’ user.

2Press (hotkeys can change).

3Press to select ‘More menus’.

4Select ‘Functions’.

5Select ‘Configure IP port’.

6Highlight the ‘Clear IP access control’ option and press .

SERVSWITCH CX

Network Config
Mac Addr	00:0F:58:40:07:FE
Use DHCP	No
IP Address	192.168.42.25
Net Mask	255.255.255.0
Gateway	192.168.0.1
VNC Port	5900
HTTP Port	80
Clear IP Access Control
Enter-Select	Esc-Exit
-Up -Down	Space-Toggle

  



78