Configure IP port, Unit Configuration

Configure IP port

Unit Configuration

Available only on ServSwitch CX with IP models, the IP port configuration menu allows you to determine settings that relate directly to the global (IP) user aspects of the unit:

•	Unit Configuration
	IP admin password, encryption
	settings, etc.
•	Network Configuration

SERVSWITCH CX

Configuration

Unit Configuration

Network Configuration

Modem Configuration

Reset Configuration

Back

This page provides access to a selection of both basic and fundamental settings for the ServSwitch CX with IP.

Keyboard

Use the arrow buttons to match the keyboard layout expected by the host system.

SERVSWITCH CX

Unit Config
Hardware	Rev 1
Firmware	1.0b7
Keyboard	UK
Admin Pwd
Unit Name	AV CATx
Time	11 : 14 : 44
Date	27 Apr 2006
Encryption	Prefer Off



	IP address, net mask, VNC port,
	etc.
•	Modem Configuration
	Baud rate, initialisation string,
	etc.
•	Reset Configuration
	Completely resets the IP portion
	of the ServSwitch CX with IP unit.

Enter-Select	Esc-Exit
-Up -Down

Admin Pwd
Enter the password that will be used	Enter-Select	Esc-Exit
to gain administrator access to the	-Up -Down	Space-Toggle
ServSwitch CX with IP. There can only
be one admin user and only that user

is given access to the configuration menus. The admin password background will be red until a reasonably secure password has been entered, although this is only advisory as any password or no password may be entered.

Unit Name



To get here

1From a local or remote (not accessible from a global keyboard), log on as the ‘admin’ user.

2Press (hotkeys can change).

3Press to select ‘More menus’.

4Select ‘Functions’.

5Select ‘Configure IP port’.

The name entered here will be displayed on the local menus and the remote VNC/browser windows.

Time and Date

Use the left and right arrow keys to select the correct time and date. The time entry uses the 24 hour clock notation. The internal real time clock will continue to run for roughly one week without power to the unit, after that it will be lost and require resetting. Use the up and down arrow keys to move between each of the sections within the time and date entries.

Encryption

Three options are available: Always on, prefer off, prefer on. The one to choose depends on the specific details of your installation - see Encryption settings for details. The use of encryption imposes a slight performance overhead of roughly 10% but is highly secure against third party intrusion.

 

