Xerox 2060 manual PRT parameters

Defining the printer to the host: TCP/IP attachment

Table F-1. JES2 FSS statement parameters (Continued)

			Range of
Item		Source of	acceptable		Your
description	Default	value	values	Comments	value
HASPFSSM	HASPFS	JES2 Load	HASPFSSM	Either omit parameter
	SM	module to be		or specify default
		loaded into FSS		value of HASPFSSM.
		address space
PRT parameters
QUEUE	None	Installation	List of
		output class	alphanumeric
		standards	output classes
COPYMARK	DATASE	Installation	DATASET or	DATASET: printer will
	T	preferences	JOB or	offset-stack or stitch
			CONSTANT	on a dataset
				boundary.
				JOB: printer will offset-
				stack or stitch on a job
				boundary.
				CONSTANT:
				Copymarks are
				constant; no offset
				stacking or stitching is
				done.
FORMS	None	Forms that will	1 to 8 form	If WS is F, only output
		be printed on	names (each 1	with these form names
		this printer	to 8	will be selected for
			alphanumeric	printing on this printer.
			characters in
			length)
FSS	None	Name of FSS	1 to 8-character	Required
			alphanumeric
			string
MARK	NO	Installation	YES or NO	YES specifies that
		preferences		MARKFORM be
				created at the end of
				each job.
MODE	FSS (if	Must be FSS	FSS	MODE=FSS should
	FSS= is			be specified.
	coded)
PRESELECT	YES	Installation	YES or NO	Specifies whether
		preferences		output datasets are
				preselected for this
				FSA.

F-4 Installation Planning Guide