Xerox 2060 manual NPS/IPS as a remote printer Rprinter

Preparing for installation

NPS/IPS as a remote printer (RPRINTER)

Provide the following information to the service representative if you configure DocuColor 2060 NPS/IPS as a remote printer on the Novell network (for further information, refer to the “Installation process” section in the “Installation” chapter of this guide):

•Novell print server name—indicates the name of the print server to which the DocuColor 2060 NPS/IPS will connect. An advertising print server with this name must be running on the Novell internet.

•Printer name(s) to service—refers to the name(s) of the printers defined for the Novell print server. Virtual printers should be defined with these names after DocuColor 2060 NPS/IPS installation is complete. These printers should be defined as type Remote Other/Unknown.

IPX internal Specify the network number for the internal IPX network in the network number DocuColor 2060 NPS/IPS server. This number must be globally

unique within the NetWare internet to which the DocuColor 2060 NPS/IPS is connected. (Do not assign a number that is used by other machines to which the DocuColor 2060 NPS/IPS will be connected.)

LAN network Specify the network number for the cabling system to which the number DocuColor 2060 NPS/IPS is connected, for example the

Ethernet or Token Ring segment.

Network framing Specify the network framing type used for IPX/SPX

type communication by DocuColor 2060 NPS/IPS. There are eight options:

•ETHERNET__II

•ETHERNET__802.3

•ETHERNET__802.2

•ETHERNET__SNAP

•TOKENRING

•TOKENRING__SNAP

•FDDI

•FDDI__SNAP.

4-12 Installation Planning Guide