Xerox 2060 manual Dgroup, Dtype, PRTAFP1, Dynamic, Jname, Fssdef, On/Off

Defining the printer to the host: TCP/IP attachment

Table F-3. JES3 FSS statement parameters (Continued)

			Range of
Item		Source of	acceptable		Your
description	Default	value	values	Comments	value
COPYMARK	J	Installation	N or J or C	C: printer will offset-
		preferences		stack or stitch on a
				dataset copy basis.
				J: Printer is to
				increment offset
				stacking or stitching on
				a job boundary.
				N: Copymarks are
				constant, and no offset
				stacking or stitching is
				done.
DGROUP	None	Installation	1 to 8-character	Specifies destination
		printer	alphanumeric	processed by this FSA
		destination	string	(applicable only if D is
		naming		specified in the WS
		conventions		parameter).
DTYPE	None	PRTAFP1	PRTAFP1	Required parameter
DYNAMIC	NO	Installation	YES or NO	DYNAMIC=NO should
		printer name		be specified so JES3
		standards		will keep FSA active
				between transmission
				of datasets.
FSSNAME	None	Name of FSA	1 to 8-character	Must match value in
		in JNAME	alphanumeric	FSSNAME parameter
		parameter	string	of FSSDEF statement.
JNAME	None	FSSNAME	1 to 8-character	Must match value in
		parameter of	alphanumeric	FSSNAME parameter
		FSSDEF	string	of FSSDEF statement.
		statement
JUNIT	ON	See	(Device address,	Device address should
		comments.	Main, dest class,	not be specified for
			ON/OFF)	TCP/IP printers.
				Main is name of
				processor the FSS is to
				run on.
				Dest class is
				destination class for
				FSA messages.
				ON or OFF specifies
				whether FSA is initially
				online or offline.
MODE	None	Must be FSS.	FSS	MODE=FSS must be
				specified.

Installation Planning Guide F-7