Xerox 2060 manual Ipds environment, Host environments

Page 25

System overview

IPDS environment

Host environments

The system emulates an IBM AFP Group 3 page printer with the Advanced Function Image and Graphics (AFIG) option and can print in all the following PSF environments:

•MVS

•VM (channel-attached only)

•VSE (channel-attached only)

•OS/2

•OS/400 (with TCP/IP only)

•AIX

NOTE: Although PSF/VSE does not support TCP/IP directly, a printing system with PSF/2, PSF/6000, or InfoPrint Manager can attach to a PSF/VSE system and the PSF/2, PSF/6000, or InfoPrint Manager can furnish the TCP/IP support for the printer.

NOTE: There is no minimum host operating system software level required. The minimum PSF level needed to support full color is v.3.2.

The NPS/IPS can be set up to receive data from the IBM host in one of two ways:

•Through a bus and tag channel connection.

NOTE: If your system will be channel-attached, the printer controller requires an additional component—a channel interface board and channel cable connector box that serve as an interface between the IBM host and the printer controller.

•Through a Token Ring or Ethernet interface using TCP/IP.

NOTE: Your system supports only one other connectivity option in addition to Ethernet. For example, Ethernet and channel connection or Ethernet and Token Ring.

NOTE: A transmission rate of at least 16 megabits per second should be used with a Token Ring interface. (Overall performance depends on network traffic and job density.)

Installation Planning Guide

1-5

Image 25

Contents 721P90520 Version 8.0 October NPS/IPSPage Table of contents Controller components and options Preparing for installationPrinter components and options Printer specifications and requirements Controller specifications and requirementsInstallation System connectionsPconsole Defining the channel-attached printer to the hostGlossary Table of contents Viii Installation Planning Guide Laser safety SafetyOzone information U. S. only Operation safety U. SOperation safety Europe Electrical supply Operator accessible areasVentilation Before cleaning your product MaintenanceCE mark Europe only Radio and telecommunications equipment directive Europe only For further information Safety Xvi Installation Planning Guide Introduction ContentsAbout this guide Conventions Page Introduction Installation Planning Guide Functional overview of the NPS/IPS System overviewSystem component overview NPS and IPS printing configurationsNPS/IPS concurrent printing Snmp supportIPP support Host environments Ipds environmentPrinting system channel-attached configuration Channel interface board and channel cable connector box Ipds data stream Line mode data streamsIM Image IMD1 Network PDL printing environment Multiple network devices Token RingSupported client hardware and operating systems Network client componentsClient networking software ResponsibilitiesSixth Sense System overview Installation Planning Guide Printer controller components Controller components and optionsSun Blade 1000 workstation Components of the printer controller Page Back panel of the printer controller Printer controller software and fonts Page Page Page Printer components Printer components and optionsCapacity Output trayMessage area Touch screenTabs, buttons, and icons Alert screensAlert screen Printer control panel Control panel buttons Name and symbol FunctionPerforming Routing Maintenance , Default settings chapter Audio tones Dry Ink cartridges Identifying the internal componentsUpper door Serial number labelTransport module Paper PathTransport Module 10. Printer paper path Paper path in the printer11. Exit module paper path Exit moduleHigh-capacity feeder Printer optionsPage 14. High-capacity stacker High-capacity stackerHigh-capacity stacker modes 15. High-capacity stacker stapler Hcss High-capacity stacker staplerHigh-capacity stacker stapler modes Printer components and options Installation Planning Guide Preparing for installation Service InstallationXerox responsibilities TrainingCustomer responsibilities Operator and Administrator trainingSite personnel Site preparationApplications DocuColor 2060 NPS/IPS installation planning checklist Installation planning checklistDate Week Activity Reference Responsibility CompletedPreparing for installation Guide to NPS/IPS network installation checklist Page Preparing for installation NPS/IPS as a print server Pserver Novell network informationEthernetsnap Tokenring Tokenringsnap Fddi Fddisnap NPS/IPS as a remote printer RprinterNetwork Information Information you supply Network preinstallation checklistAppleTalk preinstallation checklist Novell preinstallation checklistConnectivity requirements Novell Network Information Information you supplyToken Ring specifications Ethernet specificationsChannel-attached specifications Preparing for installation Installation Planning Guide Power requirements Controller specifications and requirementsNPS/IPS controller Hz wall outlet Outlet configurationsPrinter controller placement Environmental specificationsSpace requirements Sun Blade 1000 workstation placement Do not Sun Blade 1000 fan and vent locations to keep clear60 Hz Controller hardware specifications and requirements summary50 Hz Controller specifications and requirements Page Printer specifications and requirements Printer specifications and requirements Accessories outlet Power outlet requirements-PrinterOutlet placement for 2060 NPS/IPS Electrical outlet placementCondition Range Dimensions and weights Printer placementComponent Width Depth Height Weight HCSPrinter Printer with High Capacity Stacker HCS Hcss Clearance space requirements Space planning guidelinesSpace requirements Shared space 10. Back-to-back shared service area space 11. Face-to-face shared service area space 12. Face-to-back shared service area space Floor leveling Delivery access requirementsDoorway inches/mm Passageway inches/mm Doorway and passageway dimensions13. T-shaped turn Printer specifications and power requirements Printer hardware specifications and requirements summaryPre-installation checklist Page Power cable Length Power cable lengthsPower cables Length System connectionsCable enter/exit location top view Cable locationsChannel attachments System connections Installation Planning Guide Installation process InstallationYour responsibilities Network workstations Software licensing Defining the printer to the host for Ipds printingRoutine maintenance Ongoing maintenanceMeter reading and reporting Paper and other throughput stocks SuppliesSelecting paper Table A-1. Paper guidelines Page Paper care Perforated paperFigure A-1. Storing paper correctly Supplies Fuser lubricant Other suppliesCentigrade Cartons HoursTable A-3. Developers for use with colored inks DeveloperDiskettes TapesFonts Consumable supplies tablesPaper and special stocks tables Description Part number Paper Table A-4. Stocks list for DocuColor 2060 NPS/IPS printerDescription Part number Labels gummed Description Part number TransparenciesCover stock Table A-5. Items supplied with DocuColor 2060 NPS/IPS Supplies listsTable A-6. Additional supplies for DocuColor 2060 NPS/IPS Ordering supplies Page Table A-7. Supplies checklist for DocuColor 2060 NPS/IPS Xerox Customer Services Support Center Xerox support servicesPage Operator training Xerox Documentation and Software ServicesXerox Font Center Xerox Customer EducationXerox documents Related publicationsIBM reference manuals Distributing AFP Printing from a Host System GG24-4493 Page Novell NetWare overview DocuColor 2060 NPS/IPS on a Novell networkQueue to printer relationships Print queuesPrint server Pserver Job parameters Figure D-1. Print server PserverRemote printer Rprinter Using Novell forms to specify virtual printersFigure D-2. Remote printer Rprinter Choosing a Print Server or Remote Printer Configuration Table D-1. Print server and remote printer differences Configuring DocuColor 2060 NPS/IPS as a Pserver Novell configurationType Start All TokenringsnapConfiguring DocuColor 2060 NPS/IPS as an Rprinter Figure D-3. DocuColor 2060 NPS/IPS configured as aType Load Pserver PGazette Supporting DocuColor 2060 NPS/IPS on the file server Set allow unencrypted passwords=onPage MVS parameters Defining the channel-attached printer to the hostPrinter and PSF definitions PRT6 Cntl PRT6 Printdev FONTDD=*.FONT300 Defining the channel-attached printer to the host Infoprint Manager procedures for Windows NT and Windows Infoprint Manager procedures for AIX Iodevice CUNMBR=632 UNIT=AFP1 VM sample definitionsVSE sample definitions Page MVS or OS/390 parameters Defining the printer to the host TCP/IP attachmentSoftware prerequisites MVS Configuration steps MVS Network configurations MVSConfigure the printer for TCP/IP at the printer controller Configure the MVS CCU for the MVS host to MVSProc Table F-1. JES2 FSS statement parametersAutostop PRT parameters Table F-2.JES2 Initialization Dataset commands example Configuring in JES3Device parameters Table F-3. JES3 FSS statement parametersDtype DgroupPRTAFP1 DynamicTable F-4.JES3 initialization dataset commands example Table F-5. PSF/MVS Printdev statement parameters Configure the printer in PSF/MVSIpaddr FormdefJobhdr JobtrlrOvlydd ObjconddPagedef PdefddSETUP=FORMS SetupTimeout RelintvTable F-6. PSF/MVS Printdev statement example Configure TCP/IP for MVS for the printerTable F-7. TCP/IP Profile dataset parameters MVS Exec PGM=APSPPIEP Considerations for configuring TCP/IP for MVSTable F-8. TCP/IP Profile dataset statements example MVS Test the printer to ensure it prints from the MVS host Page MVS Correcting for printer performance issues MVSLAN Table F-12.MVS reference documentation References MVSAS/400 parameters Network configurations AS/400Software prerequisites AS/400 Table F-13. AS/400 software prerequisitesConfiguration Configuration steps AS/400Table F-14. AS/400 configuration worksheet for NPS/IPS WorksheetTable F-15. Create PSF Configuration screen AS/400 Create the PSF/400 configurationCreate Device Desc Printer Crtdevprt Create the printer device description AS/400Device Description Xeroxips Device Class Device Type Ipds Device Model LAN AttachmentTest the printer connection AS/400 Activation TimerLibrary Libl Remote Location Name or Address Library QgplPing ‘Remote Location’ Defining the printer to the host TCP/IP attachment References AS/400 Correcting for printer performance issues AS/400Table F-20. Reference documents AS/400 Infoprint Manager procedures for Windows NT and Windows Infoprint Manager procedures for AIX List of acronyms GlossaryLpi HposPpm SpiAscii List of termsComputer space equivalents are Multipliers arePage Ascii Compile CompatibilityConcatenate ConsolePage Interchange Code Ebcdic Page Page Internet Protocol InterfaceIP address JobLoad Line feedLocal Area Network LANProtocol Page Page Page Page Page Page Numerics IndexINDEX-2 INDEX-3 INDEX-4 Unix Index INDEX-6

Related manuals

Manual 90 pages 10.28 Kb