Xerox 2060 manual Network preinstallation checklist, Network Information Information you supply

Preparing for installation

Choose a framing type used by the file server that communicates with DocuColor 2060 NPS/IPS. If you are using print server or remote printer, and have the DocuColor 2060 NPS/IPS communicate with a different machine for each, then choose a framing type that is used by both of the machines.

If you are installing a new Novell network using Ethernet, it is recommended that you choose the ETHERNET__II framing type for the file server and the DocuColor 2060 NPS/IPS. If you are using Token Ring and the Novell server has both TOKENRING and TOKEN RING_SNAP enabled, use TOKENRING on the DocuColor 2060 NPS/IPS. For FDDI networks running Novell, it is recommended that you choose the FDDI framing type.

Table 4-2. Network preinstallation checklist
Network Information	Information you supply
Hostname
IP address for primary net device
IP netmask for primary net device
IP address for secondary net device #1 (if applicable)
IP netmask for secondary net device #1 (if applicable)
IP address for secondary net device #2 (if applicable)
IP netmask for secondary net device #2 (if applicable)
IP address for secondary net device #3 (if applicable)
IP netmask for secondary net device #3 (if applicable)
Primary network device
Default router
Secondary network devices (if applicable)
Superuser password
Accounting information
Xerox client software
lpr and lpd
UNIX command tool
Retry count

Installation Planning Guide 4-13