Printer components and options
|
|
| Table |
|
|
|
|
Name and symbol | Function | ||
|
|
|
|
Pause | Not used for DocuColor 2060 NPS/IPS. | ||
|
|
|
|
|
|
|
|
Start | Press the Start button in the Tools mode for certain settings. For information on the | |
|
| Tools mode, refer to the Guide to Performing Routing Maintenance, “Default |
|
| settings” chapter. |
|
|
|
Keypad | Use the keypad to enter: | |
| • | Your password for access to Tools mode, or |
| • | The number of copies desired for a job. |
|
| |
C | Not used for DocuColor 2060 NPS/IPS. |
Audio tones
The printer sounds an audible tone to direct your attention to a printer problem.
There are three tones:
• Attention
The Attention tone indicates that the button pressed is not able to be selected.
• Button selection
The Button Selection tone indicates that the button pressed is able to be selected.
• Fault
The Fault tone indicates that the printer is in a fault condition and will not operate until the fault is cleared.
The tones can be activated or deactivated through the Tools mode. For the procedure, refer to the Guide to Performing Routine Maintenance, the “Default settings“ chapter.
Installation Planning Guide |