Xerox 2060 manual Novell network information, NPS/IPS as a print server Pserver

Preparing for installation

•If the DocuColor 2060 NPS/IPS is unattended, you may want to specify only 1 or 2 retries to print a job.

Novell network information

The Novell network information you provide to your service representative is based on whether you configure the DocuColor 2060 NPS/IPS as a print server or a remote printer. Refer to this chapter and your Novell network administrator for assistance, if necessary.

NPS/IPS as a print server (PSERVER)

Provide the following information to the service representative if you configure DocuColor 2060 NPS/IPS as a print server on the Novell network (for further information, refer to the “Installation process” section in the “Installation” chapter of this guide):

•Novell file server name—indicates the name of the file server that the DocuColor 2060 NPS/IPS services. The file server must have the appropriate print server definition and the queue to be serviced.

•Print server name—indicates the name used by the DocuColor 2060 NPS/IPS print server. A print server definition with this name must exist on the file server that the DocuColor 2060 NPS/IPS services. A single printer (type Remote Other/Unknown) must be defined for this print server and the queue (refer to the queue name below).

•Password for the print server—refers to a password you may have added in the print server definition (using PCONSOLE). It is not necessary to add a password to a print server, and there is no default password.

•Queue name to service—refers to the name of the queue from which the DocuColor 2060 NPS/IPS print server accepts jobs. The queue must be defined on the file server that the DocuColor 2060 NPS/IPS services. The single printer that must be defined for the print server (as stated above) must also be defined to service the specified queue.

•Form names—distinct form names for DocuColor 2060 NPS/ IPS that map to the DocuColor 2060 NPS/IPS virtual printer names.

Installation Planning Guide 4-11