2.Controller components and options
The printer controller provides the printer with print data and commands, and receives status information from the printer. This chapter describes the components and options available for the controller.
Printer controller components
The printer controller consists of a
Sun Blade 1000 workstation
The printer controller is based on the Sun Blade 1000, a workstation with a
•Processor (system unit) containing the following:
–Two UltraSPARC III 750 Mhz central processing unit (CPU) modules
–4 GB memory (four 1 GB Dual
–36 GB hard disk drive
–
–3.5 inch diskette drive
•Keyboard and mouse
•Monitor
•Optional Token Ring board
•Two printer controller Interface (PCI) boards installed in the processor to interface with the print engine.
Installation Planning Guide |