Installation
Network workstations
For network workstations:
•Designate two client workstations for Xerox client software if applicable: one for initial system validation and at least one other for use in operator training.
•Load Xerox client software on any additional client workstations, if needed. Drivers and PPD files are available at www.xerox.com, or ask your Xerox representative.
Remember that you are responsible for supplying, installing, and maintaining your client workstations and the Token Ring network or Ethernet local area network (LAN) that connects them with the printer controller. You are also responsible for the network connectors required for your system.
•Have PostScript and PCL test jobs ready to run.
IPDS printing For IPDS printing:
•Have the necessary parameters defined to configure PSF for connectivity to your IPDS printer.
•Have list of stocks you want used for your default IPDS virtual printer media list (input tray) configuration. Refer to the Guide to Managing Print Jobs, in particular, the chapter “Managing IPDS jobs,” for more information.
•Sysgen your host to print to an
•If your system will be
–RS/6000 requires a channel card for NPS/IPS connectivity.
–PS/2 requires a channel card for NPS/IPS connectivity.
Refer to the installation planning checklist in the “Setting up the work area” chapter of this guide for a complete list of responsibilities.
Installation Planning Guide |