System connections
WARNING
Using an inappropriate alternate cable may degrade the performance of your equipment and may also be hazardous.
NOTE: Cable length loss must be factored in if equipment is installed in a
Cable locations
To run the cables beneath the flooring effectively, it is necessary to know where the cables enter and exit the printer. The following diagrams show those locations (marked with an X).
All power cords attach to the back of the printer. Listed below are the distances of the printer power cord attachments from the left end of the printer as you face it.
1 |
|
|
|
|
| 4"/10 cm |
|
| |||||
|
|
|
x 4"/10 cm
2
Figure 7-1. Cable enter/exit location (top view)
1.Back of system
2.Front of system
Installation Planning Guide |