Xerox 2060 manual Table F-3. JES3 FSS statement parameters, Device parameters

Defining the printer to the host: TCP/IP attachment

•One DEVICE statement for each functional subsystem application (FSA) under control of the FSS.

The following table lists the JES3 FSS statement parameters to be defined.

Table F-3. JES3 FSS statement parameters

			Range of
Item		Source of	acceptable		Your
description	Default	value	values	Comments	value
FSSDEF parameters
FSSNAME	None	Installation	1 to 8-character	Specifies name of the
		preferences	alphanumeric	FSS. (Required
			string	parameter)
MSGDEST	JES	Installation	JES or a	Specifies the console
		preferences	destination class	destination class for
			name	FSS messages.
PNAME	None	Name of the	1 to 8-character	Specifies the
		FSS	alphanumeric	procedure for starting
		procedure	string	this FSS. (Different
				FSSDEF statements
				may refer to same
				procedure.)
SYSTEM	Same as	System ID of	Valid system ID	Can also be specified
	specified in	system the	name	as QUEUE=
	JUNIT	FSS is to run
	parameter	on.
	of DEVICE
	statement
TERM	NO	Installation	YES or NO	YES specifies FSS
		preferences		terminates if JES3
				global address space
				is terminated.
TYPE		TYPE=WTR	WTR	Specifies FSS is an
		must be		output writer.
		specified		TYPE=WTR must be
				specified.
DEVICE parameters
BURST	YES	Installation	YES or NO	,M specifies
		preferences	,M	MARKFORM, which
				causes printer to
				offset-stack or stitch
				jobs, subject to
				printer’s setting and the
				COPYMARK
				parameter.

F-6 Installation Planning Guide