3M 813 owner manual Reference Printer driver and printer installation

Page 34

Reference — Printer driver and printer installation

4.Select Install from a list or specified location (Advanced), then select only the checkbox for Include this location in the search and browse to the CD Driver directory.

5.Click the Next button. If you are prompted about compatibility, click Continue Anyway.

6.When the drivers are installed, click the Finish button.

7.Upon completion of the driver installation, start the Printer Cloning application located in the Driver directory on the CD.

Note: In Windows Vista, right-click on the Printer Cloning.exe application and select Run as administrator in the menu.

8.Select Import in the Printer Cloning Wizard, then select the printer and browse to the appropriate cloning file (.zsd) in the Settings directory on the CD. Use

D4_110XiIIIPlus_PeelOff for the high volume (Zebra 110 XiIII Plus) printer or D4_TLP2844-Z_PeelOfffor the regular volume (Zebra TLP 2844-Z) printer.

9.When you have selected your printer and cloning file, click Next to import the settings into the printer driver. There may be a slight pause before the progress bar begins to update. Click Finish when prompted.

30	Copyright © 2009, 3M. All rights reserved.

Image 34

Contents Print Conversion System Model Page Contents Information to gather Service phone numbers Explanation of product safety label symbols Safety informationExplanation of signal word consequences Intended usePrinter battery Safety labelsPrinter safety Shock hazardSafety information Safety information Copyright 2009, 3M. All rights reserved Regulatory compliance FCC compliance statement regular volume printerFCC compliance statement high volume printer Canadian DOC compliance statementPage Introduction About your 3MTM Print Conversion System ModelTraining your staff System documentationOperating procedures Starting the systemPrinting regular volume printer Printing Rfid tagsPrinting high volume printer Power Control panel buttons high volume printer Button Function DataLeft Arrow Right Arrow Programming and applying Rfid tags Regular volume printer loading a tag rollLoading a tag roll in the printer Page High volume printer loading a tag roll Regular volume printer loading a ribbon Loading a ribbon in the printerHigh volume printer loading a ribbon Page Customer-supplied computer and monitor Reference Equipment specificationsCustomer-supplied barcode scanner Rfid Pad Model P12 3MTM Rfid pad antenna3MTM Rfid reader Rfid Reader ModelSanDisk ImageMate CompactFlash Card Reader/Writer 3M-supplied high volume printer3M-supplied CF card reader/writer Zebra Model 110 XiIIIPlus3MTM tag roll holder 3M-supplied regular volume printerZebra Model TLP 2844-Z Reference Hardware installation Model 813 hardware installation sequenceRfid pad placement Install 3MTM Rfid reader and Rfid padInstall Rfid pad beneath countertop optional Rfid reader mountingConnect Rfid reader communication and power cables Cable lengths Rfid reader and Rfid padPage Printer driver uninstallation Reference Printer driver and printer installationAdministrator rights Printer driver installation procedureReference Printer driver and printer installation Media Settings Document OptionsDevice Options User CommandsPrinter Firmware Install Conversion Station software Reference Conversion Station software installationConfigure Conversion Station software Page Cleaning print mechanism MaintenanceCleaning general LubricationMaintenance Copyright 2009, 3M. All rights reserved Troubleshooting Printer problems/solutions Error Condition Ribbon Element BAD Defragmenting Troubleshooting Copyright 2009, 3M. All rights reserved Warranty EffectiveWarranty Copyright 2009, 3M. All rights reserved Obtaining 3M printer supplies Page Information to gather 3M Service3M Service phone numbers 3M Library Systems Web Site3M Library Systems