Table 1. Reason Codes for Rejected Program Start Requests (continued)
Reason |
|
Code | Reason Description |
901 | Program initialization parameters are not valid. |
902 | Number of parameters for program not valid. |
903 | Program initialization parameters required but not present. |
1001 | System logic error. Function check or unexpected return code encountered. |
1002 | System logic error. Function check or unexpected return code encountered while receiving program |
| initialization parameters. |
1501 | Character in procedure name not valid. |
1502 | Procedure not found. |
1503 | System/36 environment library not found. |
1504 | Library QSSP not found. |
1505 | File QS36PRC not found in library QSSP. |
1506 | Procedure or library name is greater than 8 characters. |
1507 | Current library not found. |
1508 | Not authorized to current library. |
1509 | Not authorized to QS36PRC in current library. |
1510 | Not authorized to procedure in current library. |
1511 | Not authorized to System/36 environment library. |
1512 | Not authorized to file QS36PRC in System/36 environment library. |
1513 | Not authorized to procedure in System/36 environment library. |
1514 | Not authorized in library QSSP. |
1515 | Not authorized to file QS36PRC in QSSP. |
1516 | Not authorized to procedure in QS36PRC in QSSP. |
1517 | Unexpected return code from System/36 environment support. |
1518 | Problem phase program not found in QSSP. |
1519 | Not authorized to problem phase program in QSSP. |
1520 | Maximum number of target programs started (100 per System/36 environment). |
2501 | System logic error. Function check or unexpected return code encountered while processing a program |
| start request. |
2502 | Temporarily unable to allocate needed resources for a program start request. |
2503 | No subsystem accepting program start requests for this device. |
|
|