Cisco Systems Broadband Access Center manual Installation

Page 21

Chapter 2 Preparing to Install Components

Installation

Note Cisco recommends that you install the database transaction logs on a different physical disk than either the home directory or the data directory.

For the RDU, select the shared secret password that BACC servers on your network use as a token to authenticate communication with one another. The shared secret password is the same for all BACC servers on your network.

We recommend that Network Registrar 6.1.2.3 or higher is installed and running on any servers where you are installing BACC extensions.

For extensions, determine the name of provisioning group to which the Network Registrar server belongs.

For Network Registrar extensions, determine where you want to install the data directory (<BACC_DATA>).

Verify that you have the necessary Network Registrar configuration files, (See Appendix A, “Network Registrar Configuration File Example” for an example of these configuration files.)

Verify that you have the necessary KDC servers available.

Note If you interrupt the installation program after it begins copying files, you may have to manually clean up the locations of copied files.

Installation

The initial steps in the BACC installation program are identical regardless of the BACC component you are installing. This section describes how to work with the installation program and the initial installation steps.

You install BACC using either the graphical user interface (GUI) or the command line interface (CLI). Both of these interfaces are supplied with BACC.

Installation Using the Graphical User Interface

To install BACC using the graphical interface:

Step 1 Using an X-Windows client, log in as root on the computer on which you intend to install the BACC component.

Step 2 At the Solaris system prompt, navigate to the directory containing the setup.bin file. If you are using the BACC CD-ROM, you will find setup.bin located at the root of your CD-ROM drive.

Step 3 Enter this command to start the installation program:

> setup.bin

The installation program verifies that you have installed the required patches to the Solaris operating system. When the verification is complete, the Welcome screen appears.

Step 4 Click Next. The Choose Installation Type screen appears.

Cisco Broadband Access Center for Cable Installation Guide 2.7

 

OL-19105-01

2-7

 

 

 

Image 21
Contents Americas Headquarters Cisco Broadband Access Center for Cable Installation GuidePage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 Audience How This Guide Is OrganizedThis chapter contains the following sections Section Title Description Document ConventionsRefer to these manuals for additional information Related DocumentationTo support the DPE-590 To support the DPE-2115OL-19105-01 JDK Patches for Solaris Operating System RequirementsNetwork Registrar Requirements Hardware RequirementsKDC Patches Server Servers Server Class Processors Memory Min. #Min. # Recommended # Types of InstallationsBroadband Access Center for Cable Components Preparing to Install ComponentsItem Description Installation and Startup ProcessItem Description Item Description Broadband Access Center Database Requirements File System Block SizeThis example, the file system device is /dev/dsk/c0t0d0s4 Installation Checklist Example output from the df command is as followsLarge File Support Installation Using the Graphical User Interface InstallationInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Field Name Description Enter these commands to reload the Network Registrar serverValidating Extensions Installing the Key Distribution Center Example KDC PasswordLocated Installing the Device Provisioning Engine Installing Components Using the CLIProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Interface Cable3/0 Ip address 192.168.5.0 Configuring Network Registrar and a CmtsIp dhcp relay information option OL-19105-01 Enabling a Network Registrar Spoofing DNS Server Post-Installation ActivitiesUninstalling Broadband Access Center Save and close the /etc/syslog.conf fileSyslog is now ready to receive alerts from Bacc Uninstalling Bacc from the Console Mode Uninstalling Bacc from the Graphical User InterfacePress Enter to exit the program Following is displayedSolaris DPE DPE-590 DPE-2115 Appliance VersionBefore You Begin Upgrading the RDUUpgrading the Solaris DPE # pkgparam CSCObpr Version Upgrading Hardware DPEs Installed before you start the Bacc agent Upgrading Network Registrar ExtensionsUpgrading the KDC Migrating from Bacc Migrating the RDU DatabaseMigrateDb.sh tempdir When running this script, use this syntaxOL-19105-01 Hardware DPE Setup Sequence Connecting the Device Provisioning EngineTo do this See this section Configuring and Running a Terminal Emulation Program System displays this user mode promptLogging Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Example show dpe command output DebuggingControls Available Setting Up a Device Provisioning Engine Debugging Configuration Scripts Network Registrar Configuration File ExampleWhere Identifies the username Identifies the password Sample Script for Docsis Modems and ComputersSample Script for Docsis Modems and PacketCable MTAs Solaris Broadband Access Center Administrator’s password Alert messages InstallationChoose Installation Type screen Command line interface Installing components CommandsInstallation Summary screen 3-3,3-7,3-8,4-3 Configuration management Documentation ConventionsOrganization Related documents Domain Name SystemKDC JRun process, detectingInstalling BAC Setting up DPEsSolaris