Cisco Systems Broadband Access Center manual Installing Extensions on a Network Registrar Server

Page 27

Chapter 3 Installing Components

Installing Components Using the Graphical User Interface

Note The installation program obtains the IP address of the RDU automatically. You do not need to enter this value.

Caution If you change the default listening port value, ensure that the new value does not conflict with any existing port assignments. Also, ensure that you configure all DPEs and Network Registrar servers with the correct RDU port number. See the Broadband Provisioning Registrar Administrator’s Guide for information about configuring the DPE and Network Registrar extensions.

Step 10 Click Next. The Shared Secret Password screen appears.

Step 11 Enter and confirm the shared secret password.

Note The RDU, DPEs, and Network Registrar extension points all use the same shared secret. This is a character string, or token, that is used to authenticate communication.

Step 12 Click Next. The Installation Parameters screen appears. This screen identifies the values that you have entered in the previous screens. To modify any of the values entered:

a.Click Back until the desired screen appears.

b.Make the necessary changes.

c.Click Next repeatedly until you return to this screen.

Step 13 Click Next. When the installation is complete, the Installation Summary screen appears. Click Finish to exit the installation program.

Note You must configure your license keys using the administrator’s user interface. Refer to the Cisco Broadband Access Center for Cable Administrator’s Guide for additional information.

Installing Extensions on a Network Registrar Server

You install BACC extensions on a Network Registrar server. If you are deploying BACC in a failover environment, you also must install the extensions on the failover servers. After you install extensions, you need to configure them.

The remainder of this section explains how to install, configure, and validate these extensions.

Cisco Broadband Access Center for Cable Installation Guide 2.7

	OL-19105-01	3-3

Image 27

Contents Americas Headquarters Cisco Broadband Access Center for Cable Installation GuidePage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 Audience How This Guide Is OrganizedThis chapter contains the following sections Section Title Description Document ConventionsTo support the DPE-2115 Related DocumentationRefer to these manuals for additional information To support the DPE-590OL-19105-01 JDK Patches for Solaris Operating System RequirementsNetwork Registrar Requirements Hardware RequirementsKDC Patches Server Servers Server Class Processors Memory Min. #Min. # Recommended # Types of InstallationsBroadband Access Center for Cable Components Preparing to Install ComponentsItem Description Installation and Startup ProcessItem Description Item Description Broadband Access Center Database Requirements File System Block SizeThis example, the file system device is /dev/dsk/c0t0d0s4 Installation Checklist Example output from the df command is as followsLarge File Support Installation Using the Graphical User Interface InstallationInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Field Name Description Enter these commands to reload the Network Registrar serverValidating Extensions Installing the Key Distribution Center Example KDC PasswordLocated Installing the Device Provisioning Engine Installing Components Using the CLIProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Interface Cable3/0 Ip address 192.168.5.0 Configuring Network Registrar and a CmtsIp dhcp relay information option OL-19105-01 Enabling a Network Registrar Spoofing DNS Server Post-Installation ActivitiesUninstalling Broadband Access Center Save and close the /etc/syslog.conf fileSyslog is now ready to receive alerts from Bacc Uninstalling Bacc from the Console Mode Uninstalling Bacc from the Graphical User InterfacePress Enter to exit the program Following is displayedSolaris DPE DPE-590 DPE-2115 Appliance VersionBefore You Begin Upgrading the RDUUpgrading the Solaris DPE # pkgparam CSCObpr Version Upgrading Hardware DPEs Installed before you start the Bacc agent Upgrading Network Registrar ExtensionsUpgrading the KDC Migrating from Bacc Migrating the RDU DatabaseMigrateDb.sh tempdir When running this script, use this syntaxOL-19105-01 Hardware DPE Setup Sequence Connecting the Device Provisioning EngineTo do this See this section Configuring and Running a Terminal Emulation Program System displays this user mode promptLogging Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Example show dpe command output DebuggingControls Available Setting Up a Device Provisioning Engine Debugging Sample Script for Docsis Modems and Computers Network Registrar Configuration File ExampleConfiguration Scripts Where Identifies the username Identifies the passwordSample Script for Docsis Modems and PacketCable MTAs Command line interface Installing components Commands Administrator’s password Alert messages InstallationSolaris Broadband Access Center Choose Installation Type screenRelated documents Domain Name System Configuration management Documentation ConventionsInstallation Summary screen 3-3,3-7,3-8,4-3 OrganizationKDC JRun process, detectingInstalling BAC Setting up DPEsSolaris