Cisco Systems Broadband Access Center manual Appliance Version, Solaris DPE DPE-590 DPE-2115

Page 55

C H A P T E R 6

Upgrading Broadband Access Center for Cable

This chapter describes how to upgrade a BACC 2.5.0.2 or higher installation to BACC 2.7. If you have a BACC release preceding BACC 2.5.0.2, you must first upgrade your system to BACC 2.5.0.2 and then complete this upgrade procedure.

Table 6-1summarizes the order of upgrade and migration tasks required for BACC components for different versions.

Table 6-1	Upgrading BACC components

				Appliance	Appliance
Version		RDU	Solaris DPE	DPE-590	DPE-2115	CNR-EP	KDC

BACC 2.5.0.2		Run setup.bin.	N/A	Download the	Download the	Run the upgrade	Run the upgrade
(Migration of		At the end, the		upgrade file and	upgrade file and	script to	script to
RDU database		installer		run the DPE	run the DPE	upgrade the	upgrade the
required)		prompts you to		patch process.	patch process.	CNR_EP.	KDC.
		run the
		migration tool.

BACC 2.6.x		Run setup.bin.	Run the upgrade	Download the	Download the	Run the upgrade	Run the upgrade
(Migration of		At the end, the	script to	upgrade file and	upgrade file and	script to	script to
RDU database		installer	upgrade the	run the DPE	run the DPE	upgrade the	upgrade the
required)		prompts you to	DPE.	patch process.	patch process.	CNR_EP.	KDC.
		run the
		migration tool.

The BACC upgrade procedure requires that the components be updated in the exact order described below. Performing the upgrade in any other order may result in errors during provisioning:

•Before You Begin, page 6-2

•Upgrading the RDU, page 6-2

•Upgrading the Solaris DPE, page 6-2

•Upgrading Hardware DPEs, page 6-4

•Upgrading Network Registrar Extensions, page 6-5

•Upgrading the KDC, page 6-5

Cisco Broadband Access Center for Cable Installation Guide 2.7

	OL-19105-01	6-1

Image 55

Contents Americas Headquarters Cisco Broadband Access Center for Cable Installation GuidePage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 How This Guide Is Organized AudienceThis chapter contains the following sections Section Title Description Document ConventionsTo support the DPE-2115 Related DocumentationRefer to these manuals for additional information To support the DPE-590OL-19105-01 JDK Patches for Solaris Operating System RequirementsHardware Requirements Network Registrar RequirementsKDC Patches Server Servers Server Class Processors Memory Min. #Min. # Recommended # Types of InstallationsBroadband Access Center for Cable Components Preparing to Install ComponentsItem Description Installation and Startup ProcessItem Description Item Description File System Block Size Broadband Access Center Database RequirementsThis example, the file system device is /dev/dsk/c0t0d0s4 Example output from the df command is as follows Installation ChecklistLarge File Support Installation Using the Graphical User Interface InstallationInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Field Name Description Enter these commands to reload the Network Registrar serverValidating Extensions Example KDC Password Installing the Key Distribution CenterLocated Installing the Device Provisioning Engine Installing Components Using the CLIProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Interface Cable3/0 Ip address 192.168.5.0 Configuring Network Registrar and a CmtsIp dhcp relay information option OL-19105-01 Enabling a Network Registrar Spoofing DNS Server Post-Installation ActivitiesSave and close the /etc/syslog.conf file Uninstalling Broadband Access CenterSyslog is now ready to receive alerts from Bacc Uninstalling Bacc from the Console Mode Uninstalling Bacc from the Graphical User InterfacePress Enter to exit the program Following is displayedSolaris DPE DPE-590 DPE-2115 Appliance VersionUpgrading the RDU Before You BeginUpgrading the Solaris DPE # pkgparam CSCObpr Version Upgrading Hardware DPEs Upgrading Network Registrar Extensions Installed before you start the Bacc agentUpgrading the KDC Migrating from Bacc Migrating the RDU DatabaseMigrateDb.sh tempdir When running this script, use this syntaxOL-19105-01 Connecting the Device Provisioning Engine Hardware DPE Setup SequenceTo do this See this section System displays this user mode prompt Configuring and Running a Terminal Emulation ProgramLogging Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Debugging Example show dpe command outputControls Available Setting Up a Device Provisioning Engine Debugging Sample Script for Docsis Modems and Computers Network Registrar Configuration File ExampleConfiguration Scripts Where Identifies the username Identifies the passwordSample Script for Docsis Modems and PacketCable MTAs Command line interface Installing components Commands Administrator’s password Alert messages InstallationSolaris Broadband Access Center Choose Installation Type screenRelated documents Domain Name System Configuration management Documentation ConventionsInstallation Summary screen 3-3,3-7,3-8,4-3 OrganizationKDC JRun process, detectingSetting up DPEs Installing BACSolaris